EUS0153210_YFact_Standard_E.pdf - 第62页

2-28 2 Board Explorer 8 When conv ersion is completed, conv ersion completion message will be indicated and the conv erted Inspection program will be stor ed in the destination folder . Con version completion message 642…

100%1 / 238
2-27
2
Board Explorer
n
Use original block number (YGX only)
This method can be selected only when customization of YGX expansion storage data output is effective and data type of
the source board data is YGX. In this case, it is impossible to select “Use reference data”. Select this method when
customization of YGX expansion storage data output is effective and when converting YGX type board data opened with
block distribution.
Use original block number
642B3-S0-00
7
Conversion will be executed.
A conversion error dialog box will be indicated when an error occurs during conversion.
Conversion error dialog box
642B5-S0-00
2-28
2
Board Explorer
8
When conversion is completed, conversion completion message will be indicated
and the converted Inspection program will be stored in the destination folder.
Conversion completion message
642B7-S0-00
Converted inspector data
642B8-S0-00
The converted Inspection program can be imported with Inspection program import/export screen of
the inspector or YViOS/YSiOS.
Inspector data import/export screen
642B9-S0-00
2-29
2
Board Explorer
4.2.2 Type compatibility table
WhenconvertingboarddataofamountertotheInspectionprogram,librarypartnameofinspectorcanbe
added to the inspection data of part placement layout.
Withthisfunction,almostalltheinspectiondatawillbecompletedbyimportingtheconvertedInspection
program with the inspector unit or YViOS/YSiOS and then opening library with full distribution. (Some data
adjustment will be necessary.)
To use this function, it is necessary to create a correspondence table between parts name of the mounter and
library parts name of the inspector. If the correspondence table contains no data for a part, library part name
will be output as empty.
Mounter part name Library part name of inspector
AAA AAA01
BBB BBB01
CCC CCC01
: :
Typecorrespondencetablecanbecreatedwithtypecorrespondencetableeditor.Refertothemanualofthe
type correspondence table editor for instructions on how to use the tool.
Creation of type correspondence table
Input library part name for
the inspector.
Input part name for the mounter.
642C1-S0-00