EUS0153210_YFact_Standard_E.pdf - 第7页
The instructi on manual of th is machine is wr itten for those who operate this machine. P l e a se re a d t h i s ma n u a l c ar e f u l l y f o r co r r e c t op e r a t i o n s a nd p a y special attention to safety …
5.3
“Production Plan”-“Plan Board Order Change” dialog is extended
4-51
5.4 “Optimizer”-“Optimizer Result” is extended 4-51
Chapter 5 Rank Table Editor
1. Overview 5-1
1.1 Contents of a BIN Table 5-2
1.2 Specifying the Part Characteristics (BIN) 5-3
2. Usage 5-7
2.1 Create New 5-7
2.2 Add Table 5-7
2.3 Production Type/Board Name Edit 5-7
2.4 Pattern Name Group Edit 5-8
2.5 Combination Edit 5-9
Index
The instruction manual of this machine is written for those who operate
this machine.
Please read this manual carefully for correct operations and pay
special attention to safety precautions.
After reading through this manual, please use this manual as an
occasional reference and keep it within reach.
Microsoft™ and Windows are either registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries.
Before using Factory Tools
Contents
1. About this manual i
2. Factory Tools application configuration i
3. Checking the system configuration ii
3.1 Necessary hardware ii
3.2 Applicable models iv
3.3 Board data format v
3.4 Other cautions vi
3.5 Package contents vi
i
Before using Factory Tools
1. About this manual
This manual describes how to install the Factory Tools and how to use each application of the Factory Tools.
For detailed information on how to create and edit board data or borad data using the Factory Tools, please
read the "Factory Tools User's Manual for Creating borad Data".
For the operating methods for YAMAHA surface mounters, dispensers and solder paste printers, refer to their
operation manuals that come with the machine shipped to you.
2. Factory Tools application configuration
Factory Tools is comprised of multiple units of application software that can be selected for specific editing
tasks and functions.
Factory Tools
Board Explorer
Manage line, machine registration and board data.
Board Editor
Use this Board Editor when editing board data or creating production data.
Feeder Viewer
Use the Feeder Viewer to check feeder setups or edit the setting.
Board data Distribution
Make the board data to severl machines production.
Database Editor
Use the Database Editor to edit parts or mark database.
P (Programming) - Tool
Optimizer
Make the board data to severl machines production.
Common parts setup optimizer
This optional program optimizes the setups for shared parts.
ASCII converter
This optional program converts CAD data or data created by other machines into YGX format data.
M (Monitoring) - Tool
Remote control
•Thestatusofalineormachinecanbemonitoredfromaremotelocation,andmanagedandoperated.
•Transmissionorreceptionofboarddataordatabasecanbeperformed.
S (Setup) - Tool
Setup Navi
A USB barcode reader can be connected to the computer for offline setup.
In P-Tool, there is an AOI version besides the regular version.
P-Tool AOI
It has functions to create data for Inspector.
“Board Explorer”,“Board Editor”,“Database Editor” and “ASCII converter” are available.
“Feeder Viewer”,“Optimizer” and “Common parts setup optimizer” is not available.