allied-catalog-2013.pdf - 第17页
Mounting 17 www .alliedhightech.com Item Description 135-10007 Black, 25 lb. (1 1.5 kg) 135-10012 Green, 25 lb. (1 1.5 kg) 135-10017 Red, 25 lb. (1 1.5 kg) 135-10005-B Black, 250 lb. (1 13 kg) 135-10010-B Green, 250 lb. …
Mounting
16
(800) 675-1118 (USA & Canada) (310) 635-2466 (Worldwide)
5-1000 TechPress 3
™
, 100-240 V
Item Description
Item Description
Item Description
5-1005 1" Mold with Duplex Spacer
5-1010 1.25" Mold with Duplex Spacer
5-1015 1.5" Mold with Duplex Spacer
5-1020 2" Mold with Duplex Spacer
5-1025 25 mm Mold with Duplex Spacer
5-1030 30 mm Mold with Duplex Spacer
5-1035 40 mm Mold with Duplex Spacer
5-1040 50 mm Mold with Duplex Spacer
5-1550 Recirculating Coolant System, 115 V
5-1550-230 Recirculating Coolant System, 230 V
Mold/Heater Assemblies
TechPress 3
™
Mounting Press
The TechPress 3™ Electro-Hydraulic Automatic
Mounting Press is used to encapsulate samples for
metallographic preparation.
The microprocessor-based system allows the operator
to use either manual input or a preloaded database of
80 adjustable program, which include parameters for
mold size, single mount or duplexing, mounting resin,
curing time and temperature, pressure and cooling time.
The intuitive interface features a 7" color LCD
touchscreen to control all functions and offers 10
selectable languages.
Mold assemblies that range from 25 mm to 2" can be
easily changed and include a duplexing spacer, allowing
up to two mounts per cycle to be produced at one time.
Mold assemblies, recirculating coolant system,
consumables and accessories are sold separately.
Features:
Preparation of up to 2 mounts in 5 minutes
Selectable languages (English, Italian, French,
Spanish, Portuguese, German, Russian, Chinese,
Japanese and Korean)
7" color LCD touchscreen to control all functions
Intuitive interface optimized for productivity and
function
Safety interlock to require closure of bayonet cap
before cycle start
Selectable units: psi/BAR, °C/°F
Mold assemblies that can be easily changed from
25 mm through 2" and include a duplexing spacer,
allowing up to two mounts per cycle
One-touch or momentary-touch ram extension and
retraction
Seamless integration with recommended #5-1550
Recirculating Coolant System for standalone
and/or “green” operation
Enclosure resistant to impact, corrosion and heat
Non-conductive bayonet handles that remain cool
during operation
Bayonet holding tray that protects the die from
damage between cycles
Compact, narrow footprint
Password protectable parameters
Heating power: 1500 W
Molding pressure: up to 5500 PSI (379 Bar)
Curing temperature: 0-200°C (32-392°F)
Curing time: 0-100 minutes
Cooling time: 0-100 minutes
Dims: 11.5" W x 22" D x 19" H (292 x 559 x 483 mm)
Weight: 85 lb. (38.5 kg)
compliant for EU
Two (2) year warranty
Designed & manufactured by Allied in the USA
New!
Recirculating Coolant System
Environmentally Friendly
Mounting
17
www.alliedhightech.com
Item Description
135-10007 Black, 25 lb. (11.5 kg)
135-10012 Green, 25 lb. (11.5 kg)
135-10017 Red, 25 lb. (11.5 kg)
135-10005-B Black, 250 lb. (113 kg)
135-10010-B Green, 250 lb. (113 kg)
135-10015-B Red, 250 lb. (113 kg)
135-10005 Black, 5 lb. (2.3 kg)
135-10010 Green, 5 lb. (2.3 kg)
135-10015 Red, 5 lb. (2.3 kg)
Phenolic
Black, green and red phenolic powders are used
for routine applications, when color coding for
material identification, or as backfill for more
expensive powders.
Black Glass-Filled Epoxy
150-10110 25 lb. (11.5 kg)
150-10105 5 lb. (2.3 kg)
Item Unit
This very hard epoxy mounting
powder with glass fiber filler
provides excellent chemical
resistance, specimen adhesion and
edge retention. Mold release is
recommended (see page 20).
155-20010 Graphite-Based, 1 lb. (0.45 kg)
155-20015 Graphite-Based, 5 lb. (2.3 kg)
155-10010 Copper-Based, 1 lb. (0.45 kg)
Item Description
Transparent Thermoplastic
Compression mounting is an economical method
of encapsulating samples that can withstand the
pressure and heat of the mounting process.
A variety of mounting powders and preforms are
available. All powders include a measuring scoop.
135-40005 Black, for 2" or 50 mm Mold (Pk/100)
135-30010 Green, for 1.5" or 40 mm Mold (Pk/500)
135-30015 Red, for 1.5" or 40 mm Mold (Pk/500)
135-20005 Black, for 1.25" or 30 mm Mold (Pk/500)
135-30005 Black, for 1.5" or 40 mm Mold (Pk/500)
135-20010 Green, for 1.25" (30 mm) Mold (Pk/500)
135-20015 Red, for 1.25" (30 mm) Mold (Pk/500)
Item Description
Phenolic Preforms
Conductive
Compression Mounting
Phenolic preforms require no
measuring, are cleaner than loose
powder and are easy to use.
160-10010 Mineral-Filled, 5 lb. (2.3 kg)
160-10005 Glass-Filled, 5 lb. (2.3 kg)
Item Description
Blue Diallyl Phthalate
This mounting powder is filled with
glass or mineral and provides
excellent edge retention and
chemical resistance.
These mounting powders are used
to make conductive samples for
scanning electron microscopy and
electrolytic polishing. The copper-
based powder provides very good
edge retention and should be
used for analyzing samples where
copper is not a primary constituent.
The graphite-based powder offers
a higher hardness and is
recommended for specimens
without carbon as a component.
This is a clear mounting powder that
allows easy sample observation.
165-10005 5 lb. (2.3 kg)
Item Unit
165-10025 25 lb. (11.5 kg)
Mounting
18
(800) 675-1118 (USA & Canada) (310) 635-2466 (Worldwide)
QuickSet
QuickCure
Features:
Cure time: 15-20 minutes
82 Shore D hardness
Peak curing temperature: 60 °C/140 °F
Mixed 2:1 (Powder:Liquid) by volume
Pressure chamber recommended
Features:
Cure time: 6-8 minutes
84 Shore D hardness
Excellent hole penetration on PCBs
Peak curing temperature: 60 °C/140 °F
Mixed 2:1 (Powder:Liquid) by volume
170-10005 5 lb. Powder (2.3 kg)
170-10026 2.5 gal. Liquid (9.5 L)
175-10005 Pressure Chamber
170-10020 2 lb. Powder (0.9 kg)
170-10025 32 oz. Liquid (950 mL)
Item Description
170-10000 QuickCure Kit
Includes: 5 lb. powder, two (2) 32 oz. liquid, 50 mixing
cups, 50 stir sticks and measuring scoop
185-10005 5 lb. Powder (2.3 kg)
185-10020 2 lb. Powder (0.9 kg)
185-10030 25 lb. Powder (11.5 kg)
185-10036 5 gal. Liquid (19 L)
185-10035 2.5 gal. Liquid (9.5 L)
185-10025 32 oz. Liquid (950 mL)
185-10010 64 oz. Liquid (1.9 L)
Item Description
185-10000 QuickSet Kit
Includes: 5 lb. powder, 64 oz. liquid, 50 mixing cups,
50 stir sticks and measuring scoop
Item Description
Pressure Chamber
170-10035 25 lb. Powder (11.5 kg)
185-10040 100 lb. Powder (45 kg)
Cold Mounting
QuickCure Acrylic
QuickSet Acrylic
The use of pressure with acrylics and epoxies prevents
the formation of small bubbles (outgassing) caused by
elevated exothermic temperatures during hardening. This
also produces clearer mounts with better edge retention,
improved adhesion and reduced shrinkage. Maximum
rating: 35 psi (2.4 bar)
QuickCure offers excellent
clarity, flow, bonding and
grinding characteristics for a
wide variety of materials.
QuickSet is used to
encapsulate a wide variety
of specimens, especially
printed circuit boards and
other electronic components.
Cold mounting is recommended when encapsulating
samples that cannot withstand the heat and pressure of
compression mounting, when better flow and penetration
of the mounting resin is needed, or when a large quantity
of samples must be encapsulated at once.
Acrylics: Typically used for their rapid cure times, or
when large volume sample throughput is needed.
Epoxies: Typically used for excellent flow and penetration,
or when better adhesion, chemical resistance, less
shrinkage and clarity are required.
Dims: 4.75" (120 mm) Diameter x 3.75" (95 mm) Depth