allied-catalog-2013.pdf - 第22页
Mounting 22 (800) 675-1 1 18 (USA & Canada) (310) 635-2466 (Worldwide) Specications: Dimensions: 19" W x 19" D x 19" H (483 x 483 x 483 mm) Weight: 72 lb. (33 kg) Shown with door removed for visual cl…
* Note: For acrylics & slow-curing epoxies only
Mounting
21
www.alliedhightech.com
H.
2-Part Mounting Cups
197-10005 1.25" (Pk/12)
197-10000 1" (Pk/12)
197-10010 1.5" (Pk/12)
197-10030 30 mm (Pk/10)
197-10025 25 mm (Pk/10)
197-10040 40 mm (Pk/10)
Item Diameter Unit
Reusable cup has a separable bottom allowing easy mount
removal after curing.
197-10050 50 mm (Pk/10)
205-10300 Four (4) 1 mm wide positions
205-10305 Four (4) 2 mm wide positions
205-10310 Three (3) 3 mm wide positions
Item Description
205-10005 Plastic Coil (Pk/100)
205-10205 Multicolor with Stand-Offs (Pk/100)
205-10000 Stainless Steel Coil (Pk/100)
205-10050 Plastic Coil (Pk/1,000)
205-10200 Clear with Stand-Offs (Pk/100)
Item Description Unit
197-20011 1" x 2" (25 x 51 mm) Rectangle
197-20030 1.9" x 1.9" (48 x 48 mm) Square
197-20050 2" x 3.6" (51 x 91 mm) Rectangle
197-20005 2" (51 mm) Diameter
197-20025 1.3" x 2.6" (33 x 66 mm) Rectangle
Item Size
Sample Holding Clips
A variety of clips hold thin samples on edge for encapsulation.
Use metal for compression mounting and plastic for cold
mounting. Clips with stand-offs isolate the sample,
eliminating gaps or air bubbles at the clip/sample interface.
Sample Holding Stands (Pk/100)
These stands hold thin samples on edge for encapsulation.
198-10005 1.6" (41 mm)
198-10000 1.25" (32 mm)
198-10010 1.9" (48 mm)
198-10015 3.4" (86 mm)
Item Diameter
Disposable Mounting Cups (Pk/50)
This economical choice for high-volume mounting
requirements has tear-away pull tabs for easy mount removal.
Silicone Mold Cups
Durable, reusable silicone mold cups are for use with
epoxy or acrylic mounting materials. See sample holders
on page 28-29 for matching size. Other sizes available.
Mounting
22
(800) 675-1118 (USA & Canada) (310) 635-2466 (Worldwide)
Specications:
Dimensions: 19" W x 19" D x 19" H (483 x 483 x 483 mm)
Weight: 72 lb. (33 kg)
Shown with door removed for visual clarity
EpoxyBond 110,
4 oz. Kit
TEM/FIB Sample Adhesives
Kits Include: Mixing cups, spring clips (large and small)
and mixing instructions.
30-8000 Mount Storage Cabinet
Mounting Wax
Item Description
71-10005 EpoxyBond 110, 4 oz. (120 mL) Kit
71-10000 EpoxyBond 110, 0.5 oz. (15 mL) Kit
Item Description
71-20000 M-Bond 610, 25 g Systems (Pk/4)
71-40045 LocTite
®
460
™
Liquid, 20 g Bottle
30-8010 Mount Divider, (100) 1.25" or 30 mm diameter
30-8005 Mount Divider, (144) 1" or 25 mm diameter
30-8020 Mount Divider, (36) 2" or 50 mm diameter
30-8015 Mount Divider, (61) 1.5" or 40 mm diameter
Accessories
71-10400 Sheet Wax, 4" Diameter Disc (Pk/50)
71-10040 Mounting Wax, Clear, 50 g Stick
71-10210 Sheet Wax Dissolver, 8 oz. (240 mL) Bottle
EpoxyBond 110
EpoxyBond 110 is a hard, fast-curing epoxy adhesive
commonly used to bond glass cover slips to small or
delicate samples (i.e., ICs), precoat samples prior to
encapsulation, fill small holes/cavities and for other
mounting applications. The two-part formula is mixed
10:1 and cures bubble-free in 5 minutes at 150 °C
(302 °F). The curing temperature can also be reduced to
prevent damage to heat sensitive samples. Once cured,
it is chemically resistant to etchants and will not outgas
under vacuum.
Clear wax provides a quick and strong bond between
samples and fixtures for cutting and/or polishing. It melts
at 49 °C (120 °F) and is soluble in acetone.
Sheet wax provides uniform distribution of wax to improve
registration accuracy of the sample to the fixture
(i.e., dicing applications). It flows at 100 °C (212 °F) and is
soluble in sheet wax dissolver.
Mount Storage Cabinet
The cabinet provides storage for polished mounts to
prevent corrosion and dust contamination. The 10
cloth-lined drawers absorb moisture and hold mount
dividers for easy organization. The locking door provides
a sealed environment. Rechargeable desiccant canister
is included. Dividers are sold separately.
M-Bond 610 is excellent for adhering multiple samples
for TEM dimpling and bonding of post-polished samples
to grids for TEM and FIB observation. It is chemically
resistant and provides a very thin glue line that ion mills
evenly.
LocTite
®
460
™
is a thin, fast-curing glue used as an
alternative to wax for adhering samples to Pyrex
®
for
TEM/FIB thinning and other applications, and is soluble
in acetone.
Item Description
Item Description
Grinding / Polishing
23
MetPrep 4
™
Systems
(Pages 24-26)
MultiPrep
™
Systems
(Pages 30-31)
DualPrep 3
™
Systems
(Pages 24-26)
TwinPrep 5
™
(Page 32)
MetPrep 3
™
Systems
(Pages 24-26)
M-Prep
™
Machines
(Page 32)
AD-5
™
Fluid
Dispenser
(Page 36)
New!