allied-catalog-2013.pdf - 第21页

* Note: For acrylics & slow-curing epoxies only Mounting 21 www .alliedhightech.com H. 2-Part Mounting Cups 197-10005 1.25" (Pk/12) 197-10000 1" (Pk/12) 197-10010 1.5" (Pk/12) 197-10030 30 mm (Pk/10) 1…

Mounting

(800) 675-1118 (USA & Canada) (310) 635-2466 (Worldwide)

PCB Indexing Pins

Glass Cover Slips & Slides

Stir Sticks & Applicators

Graduated Mixing Cup

Epoxy Dissolver

Mold Release

Electronic Scale

200-10006 12 oz. (340 gm) PTFE Spray (Hot or Cold)

200-10010 16 oz. (480 mL) Spray (Cold)

200-10005 16 oz. (480 mL) Spray (Hot)

200-10100 2 oz. (60 mL) Powder (Hot)

200-10015 8 oz. (240 mL) PTFE Liquid (Hot or Cold)

Item Description

PCB Indexing Pins

132-10005 41 mm Length x 2 mm Diameter (Pk/500)

132-10000 1" Length x 0.094" Diameter (Pk/1,000)

Item Description

199-10000 Graduated Mixing Cup - 6 oz. (180 mL)

Capacity (Pk/100)

Item Description

145-50210 16 oz. (480 mL)

Item Unit

210-30000 Cotton Tipped Applicators, 6" (Pk/1,000)

210-10000 Wood Stir Sticks (Pk/1,000)

Item Description

145-90000 Electronic Scale - 400 g Capacity,

0.01 g Resolution

Item Description

Glass Cover Slips & Slides

PCB pins are used to align through-holes when encapsulating

multiple printed circuit board samples in one mount.

Adhere cover slips to delicate or small samples to support

and protect the surface when preparing unencapsulated

cross-sections. Use slides for preparing petrographic thin

sections or when using vacuum fixtures.

Stir Sticks & Applicators

Use stir sticks for mixing epoxy or acrylic components, and

applicators for cleaning and applying etchant to samples.

Epoxy Dissolver

The dissolver is a blend of solvents that removes cured

epoxy from a specimen when heated.

Mixing Accessories

For mixing epoxies or acrylics, the chemical-resistant

plastic cup is graduated for volumetric measurement. The

scale weighs epoxy components with precision.

Mold Release

Release sprays, powder and liquid prevent hot or cold

mounting materials from adhering to the mold.

72-PS2746 Glass Slide, 27 x 46 mm (Pk/144)

72-20000 Cover Slip, 18 mm Square (Pk/160)

132-10030 43 mm Length x 2 mm Diameter (Pk/500)

132-10040 50 mm Length x 2 mm Diameter (Pk/500)

132-10045 50 mm Length x 0.094" Diameter (Pk/500)

* Note: For acrylics & slow-curing epoxies only

Mounting

www.alliedhightech.com

2-Part Mounting Cups

197-10005 1.25" (Pk/12)

197-10000 1" (Pk/12)

197-10010 1.5" (Pk/12)

197-10030 30 mm (Pk/10)

197-10025 25 mm (Pk/10)

197-10040 40 mm (Pk/10)

Item Diameter Unit

Reusable cup has a separable bottom allowing easy mount

removal after curing.

197-10050 50 mm (Pk/10)

205-10300 Four (4) 1 mm wide positions

205-10305 Four (4) 2 mm wide positions

205-10310 Three (3) 3 mm wide positions

Item Description

205-10005 Plastic Coil (Pk/100)

205-10205 Multicolor with Stand-Offs (Pk/100)

205-10000 Stainless Steel Coil (Pk/100)

205-10050 Plastic Coil (Pk/1,000)

205-10200 Clear with Stand-Offs (Pk/100)

Item Description Unit

197-20011 1" x 2" (25 x 51 mm) Rectangle

197-20030 1.9" x 1.9" (48 x 48 mm) Square

197-20050 2" x 3.6" (51 x 91 mm) Rectangle

197-20005 2" (51 mm) Diameter

197-20025 1.3" x 2.6" (33 x 66 mm) Rectangle

Item Size

Sample Holding Clips

A variety of clips hold thin samples on edge for encapsulation.

Use metal for compression mounting and plastic for cold

mounting. Clips with stand-offs isolate the sample,

eliminating gaps or air bubbles at the clip/sample interface.

Sample Holding Stands (Pk/100)

These stands hold thin samples on edge for encapsulation.

198-10005 1.6" (41 mm)

198-10000 1.25" (32 mm)

198-10010 1.9" (48 mm)

198-10015 3.4" (86 mm)

Item Diameter

Disposable Mounting Cups (Pk/50)

This economical choice for high-volume mounting

requirements has tear-away pull tabs for easy mount removal.

Silicone Mold Cups

Durable, reusable silicone mold cups are for use with

epoxy or acrylic mounting materials. See sample holders

on page 28-29 for matching size. Other sizes available.

Mounting

(800) 675-1118 (USA & Canada) (310) 635-2466 (Worldwide)

Specications:

Dimensions: 19" W x 19" D x 19" H (483 x 483 x 483 mm)

Weight: 72 lb. (33 kg)

Shown with door removed for visual clarity

EpoxyBond 110,

4 oz. Kit

TEM/FIB Sample Adhesives

Kits Include: Mixing cups, spring clips (large and small)

and mixing instructions.

30-8000 Mount Storage Cabinet

Mounting Wax

Item Description

71-10005 EpoxyBond 110, 4 oz. (120 mL) Kit

71-10000 EpoxyBond 110, 0.5 oz. (15 mL) Kit

Item Description

71-20000 M-Bond 610, 25 g Systems (Pk/4)

71-40045 LocTite

460

™

Liquid, 20 g Bottle

30-8010 Mount Divider, (100) 1.25" or 30 mm diameter

30-8005 Mount Divider, (144) 1" or 25 mm diameter

30-8020 Mount Divider, (36) 2" or 50 mm diameter

30-8015 Mount Divider, (61) 1.5" or 40 mm diameter

Accessories

71-10400 Sheet Wax, 4" Diameter Disc (Pk/50)

71-10040 Mounting Wax, Clear, 50 g Stick

71-10210 Sheet Wax Dissolver, 8 oz. (240 mL) Bottle

EpoxyBond 110

EpoxyBond 110 is a hard, fast-curing epoxy adhesive

commonly used to bond glass cover slips to small or

delicate samples (i.e., ICs), precoat samples prior to

encapsulation, fill small holes/cavities and for other

mounting applications. The two-part formula is mixed

10:1 and cures bubble-free in 5 minutes at 150 °C

(302 °F). The curing temperature can also be reduced to

prevent damage to heat sensitive samples. Once cured,

it is chemically resistant to etchants and will not outgas

under vacuum.

Clear wax provides a quick and strong bond between

samples and fixtures for cutting and/or polishing. It melts

at 49 °C (120 °F) and is soluble in acetone.

Sheet wax provides uniform distribution of wax to improve

registration accuracy of the sample to the fixture

(i.e., dicing applications). It flows at 100 °C (212 °F) and is

soluble in sheet wax dissolver.

Mount Storage Cabinet

The cabinet provides storage for polished mounts to

prevent corrosion and dust contamination. The 10

cloth-lined drawers absorb moisture and hold mount

dividers for easy organization. The locking door provides

a sealed environment. Rechargeable desiccant canister

is included. Dividers are sold separately.

M-Bond 610 is excellent for adhering multiple samples

for TEM dimpling and bonding of post-polished samples

to grids for TEM and FIB observation. It is chemically

resistant and provides a very thin glue line that ion mills

evenly.

LocTite

460

™

is a thin, fast-curing glue used as an

alternative to wax for adhering samples to Pyrex

for

TEM/FIB thinning and other applications, and is soluble

in acetone.

Item Description