allied-catalog-2013.pdf - 第20页
Mounting 20 (800) 675-1 1 18 (USA & Canada) (310) 635-2466 (Worldwide) PCB Indexing Pins Glass Cover Slips & Slides Stir Sticks & Applicators Graduated Mixing Cup Epoxy Dissolver Mold Release Electronic Scale…
Mounting
19
www.alliedhightech.com
EpoxyMount
EpoxySet
Item Description
The VacuPrep
™
removes trapped air from uncured
epoxy, filling open pores and cavities in samples to provide
maximum bonding and support. This maintains sample
integrity during abrasive preparation, reducing the chance
of cracking or delamination.
EpoxyMount
VacuPrep
™
Impregnation System
Item Description
145-10005 EpoxyMount Kit
Includes: 120 oz. resin, 40 oz. hardener, 50 mixing cups,
50 stir sticks and dispensing pump
145-10010
145-10015 40 oz. Hardener (1.1 kg)
145-10025 48 oz. Resin (1.4 kg)
145-10030
175-30000 VacuPrep
™
120 oz. Resin (3.4 kg)
16 oz. Hardener (450 g)
EpoxySet
This fast-curing epoxy hardens in 2 hours at room
temperature while still maintaining quality characteristics
such as good adhesion, hardness and minimal shrinkage.
Features:
Cure time: 2 hours at room temperature for
1.25" diameter x 1" thick mounts (Heat [38 °C/100 °F]
accelerates cure time to 45 min.)
87 Shore D hardness
Peak curing temperature: 66 °C/150 °F
Mixed 10:3 (Resin:Hardener) by weight
With very low viscosity, EpoxySet offers excellent flow and
penetration. It is extremely hard, crystal clear and exhibits
firm adhesion with virtually no shrinkage. Low curing
temperature is ideal for heat sensitive samples.
Features:
Cure time: 8 hours at room temperature for
1.25" diameter x 1" thick mounts (Heat [38 °C/100 °F]
accelerates cure time to 45 min.)
89 Shore D hardness
Excellent adhesion, with virtually no shrinkage
Low viscosity, allowing penetration into small
crevices/holes
Peak curing temperature: 54 °C/130 °F
Mixed 100:12 (Resin:Hardener) by weight
Features:
Through-port for optional epoxy fill under vacuum
Cup holder for mixed epoxy
Clear top to allow sample viewing during process
Pull of up to 28 inHg vacuum
Large 10" diameter x 4.5" (254 x 114 mm) deep chamber;
capacity of up to (30) 1¼" (32 mm) cups
Stainless steel components that resist corrosive gases
Quiet, pump-free operation
80 psi (5.5 bar) compressed air operation
Dims: 13" W x 18" D x 6" H (330 x 457 x 152 mm)
Weight: 21 lb. (9.5 kg)
Two (2) year warranty
Designed & manufactured by Allied in the USA
145-20005
145-20010
145-20015
145-20020
128 oz. Resin (3.6 kg)
51 oz. Resin (1.5 kg)
16 oz. Hardener (450 g)
7 oz. Hardener (200 g)
Item Description
145-20000 EpoxySet Kit
Includes: 128 oz. resin, 16 oz. hardener, 50 mixing cups,
50 stir sticks and dispensing pump
Mounting
20
(800) 675-1118 (USA & Canada) (310) 635-2466 (Worldwide)
PCB Indexing Pins
Glass Cover Slips & Slides
Stir Sticks & Applicators
Graduated Mixing Cup
Epoxy Dissolver
Mold Release
Electronic Scale
200-10006 12 oz. (340 gm) PTFE Spray (Hot or Cold)
200-10010 16 oz. (480 mL) Spray (Cold)
200-10005 16 oz. (480 mL) Spray (Hot)
200-10100 2 oz. (60 mL) Powder (Hot)
200-10015 8 oz. (240 mL) PTFE Liquid (Hot or Cold)
Item Description
PCB Indexing Pins
132-10005 41 mm Length x 2 mm Diameter (Pk/500)
132-10000 1" Length x 0.094" Diameter (Pk/1,000)
Item Description
199-10000 Graduated Mixing Cup - 6 oz. (180 mL)
Capacity (Pk/100)
Item Description
145-50210 16 oz. (480 mL)
Item Unit
210-30000 Cotton Tipped Applicators, 6" (Pk/1,000)
210-10000 Wood Stir Sticks (Pk/1,000)
Item Description
145-90000 Electronic Scale - 400 g Capacity,
0.01 g Resolution
Item Description
Glass Cover Slips & Slides
PCB pins are used to align through-holes when encapsulating
multiple printed circuit board samples in one mount.
Adhere cover slips to delicate or small samples to support
and protect the surface when preparing unencapsulated
cross-sections. Use slides for preparing petrographic thin
sections or when using vacuum fixtures.
Stir Sticks & Applicators
Use stir sticks for mixing epoxy or acrylic components, and
applicators for cleaning and applying etchant to samples.
Epoxy Dissolver
The dissolver is a blend of solvents that removes cured
epoxy from a specimen when heated.
Mixing Accessories
For mixing epoxies or acrylics, the chemical-resistant
plastic cup is graduated for volumetric measurement. The
scale weighs epoxy components with precision.
Mold Release
Release sprays, powder and liquid prevent hot or cold
mounting materials from adhering to the mold.
72-PS2746 Glass Slide, 27 x 46 mm (Pk/144)
72-20000 Cover Slip, 18 mm Square (Pk/160)
132-10030 43 mm Length x 2 mm Diameter (Pk/500)
132-10040 50 mm Length x 2 mm Diameter (Pk/500)
132-10045 50 mm Length x 0.094" Diameter (Pk/500)
* Note: For acrylics & slow-curing epoxies only
Mounting
21
www.alliedhightech.com
H.
2-Part Mounting Cups
197-10005 1.25" (Pk/12)
197-10000 1" (Pk/12)
197-10010 1.5" (Pk/12)
197-10030 30 mm (Pk/10)
197-10025 25 mm (Pk/10)
197-10040 40 mm (Pk/10)
Item Diameter Unit
Reusable cup has a separable bottom allowing easy mount
removal after curing.
197-10050 50 mm (Pk/10)
205-10300 Four (4) 1 mm wide positions
205-10305 Four (4) 2 mm wide positions
205-10310 Three (3) 3 mm wide positions
Item Description
205-10005 Plastic Coil (Pk/100)
205-10205 Multicolor with Stand-Offs (Pk/100)
205-10000 Stainless Steel Coil (Pk/100)
205-10050 Plastic Coil (Pk/1,000)
205-10200 Clear with Stand-Offs (Pk/100)
Item Description Unit
197-20011 1" x 2" (25 x 51 mm) Rectangle
197-20030 1.9" x 1.9" (48 x 48 mm) Square
197-20050 2" x 3.6" (51 x 91 mm) Rectangle
197-20005 2" (51 mm) Diameter
197-20025 1.3" x 2.6" (33 x 66 mm) Rectangle
Item Size
Sample Holding Clips
A variety of clips hold thin samples on edge for encapsulation.
Use metal for compression mounting and plastic for cold
mounting. Clips with stand-offs isolate the sample,
eliminating gaps or air bubbles at the clip/sample interface.
Sample Holding Stands (Pk/100)
These stands hold thin samples on edge for encapsulation.
198-10005 1.6" (41 mm)
198-10000 1.25" (32 mm)
198-10010 1.9" (48 mm)
198-10015 3.4" (86 mm)
Item Diameter
Disposable Mounting Cups (Pk/50)
This economical choice for high-volume mounting
requirements has tear-away pull tabs for easy mount removal.
Silicone Mold Cups
Durable, reusable silicone mold cups are for use with
epoxy or acrylic mounting materials. See sample holders
on page 28-29 for matching size. Other sizes available.