allied-catalog-2013.pdf - 第62页

62 (800) 675-1 1 18 (USA & Canada) (310) 635-2466 (Worldwide) Milling Diamond Grinding Discs (Pk/100) Item Description 15-92MCGD5 Medium, 5 mm Ø 15-92CGD5 Coarse, 5 mm Ø 15-92FGD3 Fine, 3 mm Ø 15-92VFGD3 V ery Fine, …

www.alliedhightech.com

Milling

X-Prep

Consumables

Made of solid carbide for maximum performance and

durability, these end mills are used to cut a wide variety of

materials, including soft metals (Al & Cu), circuit board (PCB)

substrates, ferrous metals (Fe) and other nonmetals.

2-Flute end mills have deeper, longer gullets for greater

chip-carrying capacity, and are center cutting.

4-Flute end mills produce finer finishes and last longer than

2-flute end mills, because wear is distributed over a greater

area. They also remove material more quickly and can be

moved across the sample at a higher rate.

Long Reach end mills feature cutting flutes that

extend up from the tip approximately 3x the tip

diameter to allow cutting into deeper cavities.

4-Flute 2-Flute

2-Flute

4-Flute

Carbide End Mills (Pk/4)

PCB tools

are specially

coated for

cutting through

glass-fiber

reinforced

circuit board

material.

Open small areas

(as little as 100

x 100 µm).

Easily machine through copper to

expose silicon.

Tip Ø x L PCB Al & Cu Fe

0.05 mm x 38 mm

- 15-922F0.05 -

0.25 mm

x 38 mm

15-922FP0.25 15-922F0.25 15-922FS0.25

0.5 mm

x 38 mm

15-922FP0.5 15-922F0.5 15-922FS0.5

0.7 mm

x 38 mm

15-922FP0.7 15-922F0.7 15-922FS0.7

1 mm

x 38 mm

15-922FP1.0 15-922F1.0 15-922FS1.0

1.5 mm

x 38 mm

15-922FP1.5 15-922F1.5 15-922FS1.5

2 mm

x 38 mm

15-922FP2.0 15-922F2.0 15-922FS2.0

3 mm

x 38 mm

15-922FP3.0 15-922F3.0 15-922FS3.0

Tip Ø x L PCB Al & Cu Fe

0.7 mm x 38 mm 15-924FP0.7 15-924F0.7 15-924FS0.7

1 mm x 38 mm 15-924FP1.0 15-924F1.0 15-924FS1.0

1.5 mm x 38 mm 15-924FP1.5 15-924F1.5 15-924FS1.5

2 mm x 38 mm 15-924FP2.0 15-924F2.0 15-924FS2.0

3 mm x 38 mm 15-924FP3.0 15-924F3.0 15-924FS3.0

4-Flute, Long Reach

Tip Ø x L Al & Cu Fe

0.7 mm x 38 mm 15-924F0.7-3 15-924FS0.7-3

1 mm x 38 mm 15-924F1.0-3 15-924FS1.0-3

1.5 mm x 38 mm 15-924F1.5-3 15-924FS1.5-3

Standard end mills (left) have tapered tips that may restrict the

depth of the cavity they can produce when compared to long

reach end mills (right).

(800) 675-1118 (USA & Canada) (310) 635-2466 (Worldwide)

Milling

Diamond Grinding Discs (Pk/100)

Item Description

15-92MCGD5 Medium, 5 mm Ø

15-92CGD5 Coarse, 5 mm Ø

15-92FGD3 Fine, 3 mm Ø

15-92VFGD3 Very Fine, 3 mm Ø

15-92FGD5 Fine, 5 mm Ø

15-92VFGD5 Very Fine, 5 mm Ø

15-92FGD9 Fine, 9 mm Ø

15-92VFGD12 Very Fine, 12 mm Ø

15-92VFGD9 Very Fine, 9 mm Ø

Diamond grinding discs are ideal for grinding and

thinning silicon, glass and ceramic. They are secured

to mounts using glue. Diameter selection depends on

corner radius and restrictions of sample. See Loctite

454

™

or 460

™

on page 63.

Plated Diamond Tools (Pk/4)

Plated diamond

tools are used for

bulk removal of

plastic/composite

materials and

other nonmetals

including glass

and ceramic.

Item Description

15-92CP1.5 Coarse, 1.5 mm Ø x 38 mm L

15-92FP0.7 Fine, 0.7 mm Ø x 38 mm L

15-92CP1.0 Coarse, 1 mm Ø x 38 mm L

15-92FP1.0 Fine, 1 mm Ø x 38 mm L

15-92FP1.5 Fine, 1.5 mm Ø x 38 mm L

15-92FP3.0 Fine, 3 mm Ø x 38 mm L

Item Unit

15-92XL32 32 oz. (950 mL)

15-92XL128 128 oz. (3.8 L)

X-Lube

X-Lube is a solvent-free lubricant used for milling,

grinding and polishing applications. By submerging

the sample during operation, debris is contained in

the liquid, and the sample and tool are kept cooler.

It is specially formulated to minimize splashing.

Item Description

15-92VFMB0.70 Very Fine, 0.7 mm Ø x 38 mm L

15-92VFMB0.50 Very Fine, 0.5 mm Ø x 38 mm L

15-92VFMB0.40 Very Fine, 0.4 mm Ø x 38 mm L

15-92VFMB0.20 Very Fine, 0.2 mm Ø x 38 mm L

15-92FMB1.0 Fine, 1 mm Ø x 38 mm L

15-92MMB1.0 Medium, 1 mm Ø x 38 mm L

15-92VFMB1.0 Very Fine, 1 mm Ø x 38 mm L

15-92FMB1.5 Fine, 1.5 mm Ø x 38 mm L

15-92FMB2.0 Fine, 2 mm Ø x 38 mm L

15-92MMB1.5 Medium, 1.5 mm Ø x 38 mm L

15-92VFMB1.5 Very Fine, 1.5 mm Ø x 38 mm L

15-92FMB3.0 Fine, 3 mm Ø x 38 mm L

15-92CP3.0 Coarse, 3 mm Ø x 38 mm L

15-92MMB3.0 Medium, 3 mm Ø x 38 mm L

15-92CMB3.0 Coarse, 3 mm Ø x 38 mm L

15-92CGD9 Coarse, 9 mm Ø

15-92MCGD9 Medium, 9 mm Ø

15-92FGD12 Fine, 12 mm Ø

15-92FMB0.55 Fine, 0.55 mm Ø x 38 mm L

15-92FMB0.70 Fine, 0.7 mm Ø x 38 mm L

15-92VFMB2.0 Very Fine, 2 mm Ø x 38 mm L

15-92VFMB3.0 Very Fine, 3 mm Ø x 38 mm L

Metal Bonded Diamond Tools (Pk/2)

Metal bonded diamond tools are recommended for

grinding nonmetals such as mold compound, silicon,

glass and ceramic. Compared to plated tools, they are

made with finer diamonds bound in a metal matrix that

maintains better shape/profile, and they provide longer

life, higher accuracy and finer surface finish.

www.alliedhightech.com

Milling

Item Dimensions

15-92PS5 5 mm Ø x 38 mm L

15-92PS3 3 mm Ø x 38 mm L

15-92PS9 9 mm Ø x 38 mm L

15-92PS12 12 mm Ø x 38 mm L

Large Diameter Mounts (Pk/5)

Mounts are used to secure grinding or polishing discs for

preparation of areas greater than 25 mm

. They are made

of a hardened steel for rigidity and precision ground to

eliminate vibration at high speeds.

Small diameter polishing discs

are secured to mounts using

LocTite

454 or 460

™

These gel-based and liquid-

based adhesives are used

to secure grinding and

polishing discs to mounts.

15-9251 1 mm Ø x 38 mm L

15-9250.5 0.5 mm Ø x 38 mm L

15-9251.5 1.5 mm Ø x 38 mm L

15-9252 2 mm Ø x 38 mm L

15-9253 3 mm Ø x 38 mm L

Item Dimensions

71-40045G LocTite

454

™

Gel, 3 g Tube

Item Description

Small Diameter Mounts (Pk/20)

Adhesives

Punches feature a

disposable, razor-sharp,

medical grade stainless

steel tip used to extract

polishing discs.

15-92P2-D 2 mm Ø

15-92P3-D 3 mm Ø

15-92P1.5-D 1.5 mm Ø

15-92P1-D 1 mm Ø

15-92P0.5-D 0.5 mm Ø

Item Dimensions

Punches (Pk/25)

Small diameter polishing discs

can be extracted from 6" x 6"

sheets using a punch.

180-10950 Planar Pad, 6" x 6" Sheet

180-10930 Final-POL, 6" x 6" Sheet

180-10935 Final X, 6" x 6" Sheet

180-10105 Final A, 6" x 6" Sheet

180-10960 Chem-Pol, 6" x 6" Sheet

180-10910 X-Pad II, 6" x 6" Sheet

Item Description

Polishing Sheets (Pk/4)

Large diameter polishing discs are used for preparing

larger samples to produce smooth, mirror-like, scratch-free

finishes. They are secured to mounts using a high

performance adhesive such as LocTite

454 or 460

™

Item Description

180-10952 Planar Pad, Plain Back, 9 mm Ø

90-150-544 DiaMat, Plain Back, 9 mm Ø

90-150-545 DiaMat, Plain Back, 12 mm Ø

90-150-735 Final-POL, Plain Back, 12 mm Ø

180-10953 Planar Pad, Plain Back, 12 mm Ø

180-10025 Final A, Plain Back, 12 mm Ø

90-150-733 Final-POL, Plain Back, 5 mm Ø

180-10023 Final A, Plain Back, 5 mm Ø

180-10083 Chem-Pol, Plain Back, 5 mm Ø

90-150-734 Final-POL, Plain Back, 9 mm Ø

180-10024 Final A, Plain Back, 9 mm Ø

180-10084 Chem-Pol, Plain Back, 9 mm Ø

180-10085 Chem-Pol, Plain Back, 12 mm Ø

180-10951 Planar Pad, Plain Back, 5 mm Ø

90-150-543 DiaMat, Plain Back, 5 mm Ø

Large Diameter Polishing Discs (Pk/50)

71-40045 LocTite

460

™

Liquid, 20 g Bottle