00195366-01_InstallationManual_EDM_en.pdf - 第37页
Installation Manual SIPLACE EDM Edition 11/2006 M = months D = days H = hours M = minutes S = seconds 5.2.3.20 Compression type Key: compressionType Enum Type: Values: None Zip Bzip Zip Default: Valid for: Line server Ma…
Installation Manual SIPLACE EDM Edition 11/2006
5.2.3.17 Use advanced EDM notification filtering
Key: useAdvancedNotificationFiltering
String (“true”/”false”) Type:
true Default:
Master server Valid for:
Description: Activation/deactivation of direct import/rejection of notifications by the master
server.
If these filters are deactivated, all notifications are entered in the clearing pool. If
they are activated, changes to objects can be accepted/rejected without first being
displayed in the clearing pool (for configuration, see sections 5.4.3 and 5.4.4).
5.2.3.18 Modified object protection
Key: useModifiedObjectProtection
String (“true”/”false”) Type:
true Default:
Line server Valid for:
Description: Activation/deactivation of the overwriting of modified objects in the line server.
If this object is activated, objects which are currently in the clearing pool are not
overwritten with the (older) data from the master server during a pull operation.
5.2.3.19 Response timeout
Key: responseTimeout
Time Type:
P0Y0M0DT0H5M0S (= 5 minutes)
Default:
Line server Valid for:
Description: Time period in which the line server considers a reply to a service request from the
master server to be valid. Timing problems can arise here due to the interaction
between SIPLACE Pro and XML Import/Export that may require a change to be
made. However, the timeout should not be set to a value too high since this can
cause the users to become very irritated.
The other options are as follows (from left to right):
Y = years
36 of 66
Installation Manual SIPLACE EDM Edition 11/2006
M = months
D = days
H = hours
M = minutes
S = seconds
5.2.3.20 Compression type
Key: compressionType
Enum Type:
Values: None
Zip
Bzip
Zip Default:
Valid for: Line server
Master server
Clearing pool
Description: Compression mode for the data transfer. The setting must be identical throughout
the entire system.
The default setting represents a good compromise between the compression ratio
and processing time. If extremely large amounts of data are transferred by the
customer, it may be necessary to set the compression to Bzip. This method offers a
much higher compression ratio than Zip, but at the cost of longer processing times.
Compression should only be switched off when the amount of data is always very
small (< 4MB).
5.2.3.21 Client workflow configuration
Key: clientWorkflowConfig
File Type:
Clientworkflowconfig.xml Default:
Line server Valid for:
Definition of the workflow on the EDM client. The file name is specified relative to
the configuration directory.
Description:
37 of 66
Installation Manual SIPLACE EDM Edition 11/2006
5.2.3.22 Service remoting endpoint
Key: serviceRemotingEndpoint
String Type:
Line server Valid for:
Description: .NET remoting endpoint for communication between the EDM client and EDM line
server. The entry has the format:
[servername]:[tcpport]/EdmService
5.2.3.23 Application template storage
Key: templateStorage
Path Type:
[AppDir]\templateStorage
Default:
Valid for: Line server
Master server
Storage location for application templates. The path can be specified absolutely or
relative to the EDM installation directory.
Description:
5.2.3.24 Assigned SPI lines
Key: spiLines
Section Type:
Line server Valid for:
Description: Contains the SPI lines assigned to the line server. This entry is only used for
the EDM VDM blob extensions.
The entries have the format <line path="path"/>, where “path” is the
unqualified full path of the line.
38 of 66