00195366-01_InstallationManual_EDM_en.pdf - 第38页
Installation Manual SIPLACE EDM Edition 11/2006 5.2.3.22 Service remoting endpoint Key: serviceRemotingEndpoint String Type: Line server Valid for: Description: .NET remoting endpoint for communication between the EDM cl…
Installation Manual SIPLACE EDM Edition 11/2006
M = months
D = days
H = hours
M = minutes
S = seconds
5.2.3.20 Compression type
Key: compressionType
Enum Type:
Values: None
Zip
Bzip
Zip Default:
Valid for: Line server
Master server
Clearing pool
Description: Compression mode for the data transfer. The setting must be identical throughout
the entire system.
The default setting represents a good compromise between the compression ratio
and processing time. If extremely large amounts of data are transferred by the
customer, it may be necessary to set the compression to Bzip. This method offers a
much higher compression ratio than Zip, but at the cost of longer processing times.
Compression should only be switched off when the amount of data is always very
small (< 4MB).
5.2.3.21 Client workflow configuration
Key: clientWorkflowConfig
File Type:
Clientworkflowconfig.xml Default:
Line server Valid for:
Definition of the workflow on the EDM client. The file name is specified relative to
the configuration directory.
Description:
37 of 66
Installation Manual SIPLACE EDM Edition 11/2006
5.2.3.22 Service remoting endpoint
Key: serviceRemotingEndpoint
String Type:
Line server Valid for:
Description: .NET remoting endpoint for communication between the EDM client and EDM line
server. The entry has the format:
[servername]:[tcpport]/EdmService
5.2.3.23 Application template storage
Key: templateStorage
Path Type:
[AppDir]\templateStorage
Default:
Valid for: Line server
Master server
Storage location for application templates. The path can be specified absolutely or
relative to the EDM installation directory.
Description:
5.2.3.24 Assigned SPI lines
Key: spiLines
Section Type:
Line server Valid for:
Description: Contains the SPI lines assigned to the line server. This entry is only used for
the EDM VDM blob extensions.
The entries have the format <line path="path"/>, where “path” is the
unqualified full path of the line.
38 of 66
Installation Manual SIPLACE EDM Edition 11/2006
5.2.3.25 SQL database access
Key: sqlDataSource
String Type:
Valid for: Master server
Clearing pool
Description: Access to the SQL server to store the change notifications and the objects changed
on the lines (EDM database).
This setting does not refer to the SIPLACE Pro database.
5.2.3.26 SQL user name
Key: sqlUserName
String Type:
Valid for: Master server
Clearing pool
User name for access to the SQL server. Description:
5.2.3.27 SQL password
Key: sqlUserPassword
String Type:
Valid for: Master server
Clearing pool
Password for access to the SQL server. Description:
5.2.3.28 Starting point
Key: startingPoints
Section Type:
Master server Valid for:
Description: Configures allowable starting points in the application template.
The entry has the format
<objectServerType value=“ObjectServerType”/>
39 of 66