IT Feeder Manual-45Series(English V2.0)Ver5.pdf - 第29页
IT Feeder System 1-17 <(Part)Description> character string box Displays the description on the Part from the searched reel information if there is any . <1st Reel> group box In case the re…
Samsung Intelligent Feeder System
Figure 1-18. View → Message screen configuration
1.4.5. Machine Feeder Program dialog box
In case the <Local Feeder Programming> is at <Enable> state in the FIS environment
setup (refer to Figure. 1-2), when the reel barcode is inputted through barcode reader or
manual input dialog box, the local feeder programming dialog box is displayed in the
screen as shown in Figure. 1-19.
Figure 1-19. Machine Feeder Program dialog box
<Slot Number> character string box
Displays the slot number of the feeder being programmed. When a feeder is installed,
the feeder scanner reads the feeder and displays the respective feeder number.
<Feeder Type> character string box
Searches the database for the feeder with the slot number read above and displays
the feeder type.
<Part Name> character string box
Searches the barcode entered in the database, reads the reel information and displays
the Part Name.
<Registered> character string box
Displays the registration date of the Part Name from the searched reel information.
1-16
IT Feeder System
1-17
<(Part)Description> character string box
Displays the description on the Part from the searched reel information if there is any.
<1st Reel> group box
In case the remaining reel is connected with another reel containing the same parts
during operation, the information concerning the remaining reel is displayed.
<2nd Reel> group box
Displays the information on the reel connected to the 1
st
reel.
<Barcode> character string box
Displays the currently entered barcode.
<Registered> Character string box
Displays the initial registration date and time of the part reel from the searched reel
information.
<Last Updated> character string box
Displays the latest update date and time of the searched reel information.
<Count> character string box
Displays the latest part count of the part reel from the searched reel information.
<(Reel)Description> character string box
If there is any description on the part reel in the searched reel information, it is
displayed.
<Modify…> button
Displays the dialog box to change the part count. The part count can be changed in
consideration of the number of components discarded during reel change.
icon
Displays whether the part reel of the barcode entered is registered in the database. If it
is registered, the icon is displayed in green, if not, a message telling “Reel code is not
registered” is displayed on the screen and the icon is displayed in yellow.
If another barcode is not entered within 10 seconds after the Feeder program ends, the
Local Feeder Programming dialog box ends automatically.
Machine Feeder Program procedure
① Install the part reel on the feeder to program.
② Enter the barcode of the part reel. Input can be done by a barcode reader or
through the manual input dialog box
③ The Programming dialog box is displayed on the screen as in [Figure 1-19].
④ When the Feeder is installed in the desired slot, the Feeder Slot Number and
Feeder Type are displayed and programming ends.
⑤ When the feeder is programmed normally, the reel icon flashes.
⑥ If another barcode is not entered within 10 seconds, the dialog box ends
automatically.
Samsung Intelligent Feeder System
1.4.6. Part count modification dialog box
There are cases where the user wants to modify the part count by the number of
components discarded during feeder reel change. When the <Modify..> button in [Figure
1-19] is clicked on, the part count modification box is displayed on the screen as in
[Figure 1-20].
Figure 1-20. Part count modification dialog box (Decrement mode)
Modification can be made by entering the number of remaining parts directly.
1.4.7. Message box
The above message box is displayed when a barcode is entered in a status where the
equipment is set for no feeder-programming. If the user wants to replace components in
the feeder, change the “Local Feeder Programming” status to “Enable” in the FIS
environment setup.
To set the FIS environment, a password is needed. If the password entered does not
coincide with the set password, the above error message is displayed.
When a barcode entered is not registered in the database, the above error message is
1-18