A10011-ASM-T47-EN-Spec-X-Serie S_DMS.pdf - 第21页

21 Board conveyor Single and flexible dual conveyor Single conveyor When using a single con- veyor, boards are moved behind one another, alo ng a conveyor lane and into the placement m achine, where they are placed. This…

Placement heads

Nozzle changer

Technical data

Nozzle changer for the SIPLACE SpeedStar

Number of magazines

SIPLACE X2 S/X3 S/X4 S

SIPLACE X4i S

a) All magazines in the nozzle changer must be configured.

Maximum number of nozzle garages

SIPLACE X2 S/X3 S/X4 S

SIPLACE X4i S

120

Standard configuration

SIPLACE X2 S/X3 S/X4 S

SIPLACE X4i S

6 magazines with 120 nozzle garages

4 magazines with 80 nozzle garages

Option: Nozzle changer "row 2" 4 magazines with 80 nozzle garages

Nozzle types 40xx

Nozzle changer for the SIPLACE MultiStar

Number of magazines

SIPLACE X2 S/X3 S/X4 S

SIPLACE X4i S

b) With restrictions at location 2 for MTC/WPC

PLEASE NOTE: When you use the Smart Pin Support option, the maximum number of noz-

zle changer magazines is reduced.

Maximum number of nozzle garages

SIPLACE X2 S/X3 S/X4 S

SIPLACE X4i S

120

Standard configuration

SIPLACE X2 S/X3 S/X4 S

SIPLACE X4i S

80 x 20xx nozzle garages

1 magazine with 9 x 28xx nozzle garages

60 x 20xx nozzle garages

1 magazine with 9 x 28xx nozzle garages

Option: Nozzle changer "row 2" 4 magazines with 80 x 20xx nozzle garages

Nozzle types

40xx, 11xx, 12xx

20xx, 28xx

Nozzle changer for the SIPLACE TwinStar

Number of magazines

Locations 1 and 3

Locations 2 and 4

max. 12 magazines for max. 24 nozzle garages

max. 10 magazines for max. 20 nozzle garages

Number of nozzle garages may be freely configured

Standard configuration 3 magazines with two nozzle garages each

1 magazine with one nozzle garage

Nozzle types 4xx with adapter

5xx (standard)

9xx with adapter

Special nozzle, gripper

Board conveyor

Single and flexible dual conveyor

Single conveyor

When using a single con-

veyor, boards are moved

behind one another, along a

conveyor lane and into the

placement machine, where

they are placed. This con-

veyor variant is particularly

suitable for very wide boards.

Flexible dual conveyor

To keep the range of PCBs to

be processed as wide as

possible - whilst maintaining

maximum productivity - the

flexible SIPLACE dual con-

veyor allows you to choose

between single conveyor

mode and dual conveyor

mode. In the dual conveyor,

two boards are moved into

the placement machine and

placed either at the same

time (synchronous mode) or

alternatively (asynchronous

mode). This makes it possi-

ble to process the top and

bottom sides of a board in

one line.

Single conveyor

Flexible dual conveyor

IPC-Hermes-9852

A protocol for advanced development of Industry 4.0 in electronics production

The Hermes Standard, also published as IPC-HERMES-9852, is a non-proprietary open protocol,

based on TCP / IP and XML. This boosts the exchange of PCB-relevant data between the various

machines in the electronics production lines. The Hermes Standard was initiated, developed and

established and is still managed by a group of leading equipment manufacturers, who share their

know-how to achieve a significant step towards advanced process integration. It has been recognized

by IPC as the next generation solution for IPC-SMEMA-9851, normally known as "SMEMA standard".

The founding and defining body The Hermes Standard Initiative is available to all equipment providers

wanting to actively participate in using the benefits of Industry 4.0 for their customers.

Board conveyor

Technical data

Single conveyor Flexible dual con-

veyor

Dual conveyor in sin-

gle conveyor mode

Board dimensions

(length x width)

a) Please observe the max. length of the board of 410 mm when using Smart Pin Support.

X2 S / X3 S / X4 S - standard 50 mm x 50 mm to

450 mm x 560 mm

50 mm x 50 mm to

450 mm x 320 mm

50 mm x 50 mm to

450mm x 560mm

X2 S / X3 S / X4 S - long board

b) With input/output conveyor only

50 mm x 50 mm to

850 mm x 560 mm

50 mm x 50 mm to

850 mm x 320 mm

50 mm x 50 mm to

850mm x 560mm

X4i S - standard

c) I-PLacement and alternating placement mode are possible with board lengths up to 380 mm. Only alternating place-

ment mode is possible for boards longer than 380 mm.

50 mm x 50 mm to

380 mm x 560 mm

50 mm x 50 mm to

450 mm x 300 mm

50 mm x 50 mm to

450mm x 510mm

50 mm x 50 mm to

450 mm x 510 mm

50 mm x 50 mm to

380 mm x 320 mm

X4i S - long board

50 mm x 50 mm to

610 mm x 510 mm

50 mm x 50 mm to

610 mm x 300 mm

50 mm x 50 mm to

610mm x 510mm

Stationary conveyor side Right or left Right, left or outer

Automatic electrical width adjust-

ment

Standard

PCB thickness

Standard: 0.3 mm to 4.5 mm

PCB warpage See page 25

PCB weight

Standard

d) The board weight value refers to the weight of the board plus the weight of the components.

Max. 3.0 kg

e) Boards up to a weight of 10kg on request.

Max. 2.0 kg Max. 2.0 kg

Clearance on PCB underside 25 mm

PCB conveyor height

Option:

Standard:

SMEMA option:

900 mm

930 mm

950 mm

Type of interface SMEMA or IPC-HERMES-9852

Component-free PCB handling

edge

3 mm

PCB changeover time

Single conveyor

Dual conveyor

f) 0 seconds in asynchronous mode, otherwise 1.5 seconds.

< 1.5 seconds

0 seconds

Important information for machines in combination with SIPLACE X-Series:

When setting up a machine (S; F-, HS-, HF-, X- or D-Series) next to a SIPLACE X-Series, be aware that there is limited room

between the two machines. In these cases, use suitable conveyor extensions to create room of 0.5m for the operator between the

two machines.

To achieve top placement performance, fit the first machine in a SIPLACE X-Series line with an input conveyor extension and the

last machine in the line with an output conveyor extension.