A10011-ASM-T47-EN-Spec-X-Serie S_DMS.pdf - 第26页
26 PCB warpage PCB warpage during placement To avoid impairing the placement qu ality and speed, we recommend using a PCB support e.g. Smart Pin Support so that the PCB warpage downwards does not exceed 0.5 mm. PCB warpa…
25
PCB warpage
PCB warpage across the direction of travel
max. 1 % of the PCB diagonal, but not
exceeding 2 mm
PCB warpage on the conveyor
Fixed clamped edge
Movable clamping device
PCB
Fixed clamped edge
Conveyor belt
PCB transport direction
Front board edge
Front board edge
PCB warpage in direction of travel + PCB thickness < 5.5 mm
Bending up of front board edge max. 2.5 mm
Left conveyor belt
Right conveyor belt
PCB transport direction
26
PCB warpage
PCB warpage during placement
To avoid impairing the placement quality and
speed, we recommend using a PCB support e.g.
Smart Pin Support so that the PCB warpage
downwards does not exceed 0.5 mm.
PCB warpage up, max. 2 mm
PCB support
PCB warpage down, max. 2 mm
Changes in the surface position are automatically applied by the functions for learning the height.
27
Smart Pin Support
Smart Pin Support
The Smart Pin Support
option automatically places
support pins on the lifting
table. A gripper unit is used
to take the support pins out of
the smart pin magazine and
place them in the predefined
positions.
Before a Smart Support pin
is placed, the position is
cleaned of any contaminants
with a gentle blast of air. In
addition, the correct position-
ing of the support pin is
checked after its placement,
with the PCB camera.
Smart pin magazine
There are two different mag-
azines available for auto-
matic changeover of max. 5
or max. 10 support pins in the
various machine configura-
tions. These magazines are
fixed to a magazine holder
and are fitted to the COT
insert.
Programming
The positions of the support
pins in the machine can be
defined for each board side,
in the SIPLACE Pro Board
Editor.
A 3D image of the board and
the support pins allows you
to recognize and prevent any
collision risks between the
support pin and the compo-
nents, even for stepped
transportation of boards with
excess length.
Support p
Gripper unit
Magazine W5
Magazine Q 10