A10011-ASM-T47-EN-Spec-X-Serie S_DMS.pdf - 第65页
65 List of options A vailable options X2 S X3 S X4 S X4i S Notes Flexible dua l conveyor fixed side right XX X X Flexible dua l conveyor fixed side left XX X X Long board (LBO) X X X X Thick board X X X X S peedS tar C&a…
64
Technical data
Transportation and delivery configuration
Description
Within Europe, the machine
is delivered on a robust
wooden pallet. If sent over-
seas, the machine is pack-
aged in a wooden crate.
Configuration when deliv-
ered
• The dual conveyor has a
preset width for lane 1 of
100mm and for lane 2 of
210mm.
• Both keyboards, the oper-
ating panel and the moni-
tors are dismantled.
• The indicator lamp is dis-
mantled.
Transport dimensions and weight
Means of transport
A fork-lift with the following specification will be needed to carry
the machine in its crate:
Length
Width
Height
2000 mm
2960 mm
1620 mm
Weight Dispatch Dispatch
within Europe overseas
3,859 kg 4,359 kg
Fork length
Lifting power
Clear fork width
Min. 1800 mm
Min. 6000 kg
Min. 350 mm
Attachment point
for the fork-lift
Attachment point
for the fork-lift
65
List of options
Available options X2 S X3 S X4 S X4i S Notes
Flexible dual conveyor
fixed side right
XXXX
Flexible dual conveyor
fixed side left
XXXX
Long board (LBO) X X X X
Thick board X X X X
SpeedStar C&P20 P X X X X In the two gantry area, only
available in combination
with a second SpeedStar.
Reconfiguration kit for SpeedStar X X X X
MultiStar CPP X X X X
Reconfiguration kit for MultiStar X X X X
Stationary component camera, type 33, 55 x 45 digital X X X X For the MultiStar CPP and
placement area 2.
TwinStar X X X X Placement area 2 only for
X4i S.
High-Force Head X X X X Placement area 2 only for
X4i S.
Reconfiguration kit for TwinStar or High-Force head X X X X Placement area 2 only for
X4i S.
Stationary component camera, type 25,
16 x 16 digital
X X X X Only for the TwinStar or
High-Force Head.
Vision Teach Station X X X X
Nozzle changer X X X X Depends on placement
head.
Nozzle changer "row 2" X X X X Depends on placement
head.
Component trolley X X X X X
SIPLACE SmartFeeder X, 8 mm to 104 mm X X X X
SIPLACE SmartFeeder Xi, 4 mm, 8 mm and 2x8 mm
Splice point recognition for X feeder modules X X X X
SIPLACE MeasuringFeeder X X X X X
SIPLACE LDU 2 X X X X X
SIPLACE Glue Feeder X X X X
Mount for additional tape reel X X X X
SIPLACE Smart Pin Support -- X X X SIPLACE X2 S on request
Virtual inkspot handler X X X X
Tape reels, level 2 X X X X
66
List of options
Available options X2 S X3 S X4 S X4i S Notes
Adapter X X X X X Tray Stack Feeder, Road-
runner, S linear vibratory
feeder and Label Pre-
senter can be configured
on a component trolley X
with this adapter.
110/208 V conversion kit X X X X
2D board barcode readers X X X X
PCB barcode reading with PCB camera X X X X
External pre-setup place X X X X
3D coplanarity sensor X X X X Only for the TwinHead or
High-Force Head.
Tray holder for SIPLACE X X X X X Locations 2 and/or 4, not in
combination with the
SpeedStar.
Wafflepack Changer (WPC) X X X -- Only at location 2, not in
combination with the
SpeedStar.
Matrix Tray Changer (MTC) X X X -- Only at location 2, not in
combination with the
SpeedStar.
Service flap X X X X Required in conjunction
with the MTC
JTF-S/JTF-M X X X X Only in connection with the
fixed component table.
Component table, fixed installation X X X X For JTF-S/JTF-M and
LDU-X.
Input conveyor extension X X X X
Output conveyor extension X X X X
Hand guard for conveyor X X X X
Dummy feeder module X X X X
Barcode-controlled production including
WDTL
XXXX
WDTL inkspots X X X X
Station-wise download X X X X
Borrow Performance X X X X
Interior lighting X X X X
OSC package X X X X
OnBoard PCB inspection X X X X