CM602规格说明书（英文）.pdf - 第30页

CM602-L 2006.0515 - 25 - A ppli cable components Standard Spec ial SOP, SOJ, PLCC (All dimensi ons in mm) Except for the standard comp onent type s and dim ension range, depending on the comp onent and stick shape s, com…

100%1 / 74
CM602-L 2006.0515
- 24 -
■
Intelligent Stick Feeder (Option)
The stick feeder supplies components through the stick by vibration.
Intelligent stick feeder has improved the ability to support large-sized components, in addition to the tradi-
tional merits such as high versatility (*1), quick delivery (*2), and maintenance-free (*3).
*1 It supports not only SOP, SOJ, and PLCC but also odd-shaped components such as the connector.
*2 With the feeding method that cuts out stick tips (see below), it can feed components as soon as you get them.
*3 It needs no particular maintenance except for such cleaning as dust removing.
・
Installation pitch: 84 mm
・
Maximum number of feeders installable:
Type B-0 24
Type C-0 12
(Multi-functional head-support stage)
Type C-1 12
(Multi-functional head-support stage)
* It is shared with the CM400 series, DT401, and CM212.
Component feeding methods
Feeding with stick tips cut out Feeding with a guide block (Option)
When components in sticks are level and stable while the
sticks are placed in a horizontal position, cut out the stick
tips so that the components will be picked up directly from
inside the sticks.
When components in sticks are not level and not stable
while the sticks are placed in a horizontal position, attach
a block (called a guide block) to solve those problems so
that the components will be picked up from the guide
block.
The guide block is created separately according to the
component dimensions to be used.
How to design the guide blocks is open to the public, so
the users can make them.
PICKUP
directly from inside sticks
Tips cut
Guide block
PICKUP
from a guide block
CM602-L 2006.0515
- 25 -
Applicable components
Standard Special
SOP, SOJ, PLCC
(All dimensions in mm)
Except for the standard component types and dimension
range, depending on the component and stick shapes,
components of up to the following dimensions may also
be used.
If using such components, you need to flow them actually
to check for feeding conditions or consult us.
(All dimensions in mm)
Applicable sticks
(All dimensions in mm)
Number of attachable sticks
Feeding with stick tips cut out Feeding with a guide block
See Table 1 for the number of attachable sticks. See either Table 1 or 2, whichever has less number, for
the number of attachable sticks.
Table 1 Table 2
* In principle, sticks to be attached shall be of the same type.
Also different types can be used; however, there are limits to the stick shape and dimension.
For details, please consult us.
WLH
Min
892.5
Max
31 31 6
WLH
Min
---
Max
31 60 25
Ws Ls Hs
Min
- 300 -
Max
34 600 28
Stick width
Ｗｓ （ｍｍ）
Number of
attachable sticks
Ｗｓ ≦ １９ ３
１９ ＜ Ｗｓ ≦ ２８ ２
２８ ＜ Ｗｓ ≦ ３４ １
Component width
Ｗ（ｍｍ）
Number of
attachable sticks
Ｗ ≦ １６ ３
１６ ＜ Ｗ ≦ ２５ ２
２５ ＜ Ｗ ≦ ３１ １
Ws
Hs
Ls
Ws
Hs
Ws
Hs
Ws
Hs
SOP
L W
H
L
W
W
L
W
L
SOJ PLCC
Connecto
r
H
H
H
CM602-L 2006.0515
- 26 -
■
Intelligent Bulk Feeder (Option)
The bulk feeder supplies components in bulk; it aligns random chips and sends them to the pickup position
though vacuum suction.
Intelligent bulk feeder has a new function of vacuum ON/OFF control, in addition to the field-proven traditional
mechanism in the chip transfer section. This function stems the fouling in the vacuum systems to reduce the
frequency of maintenance by turning off vacuums when the feeders are not running. As a result, it improves
the usability and provides the higher chip-feeding quality than the traditional one.
∗
As standard, 8 L/min of air is required per intelligent bulk feeder.
・
Maximum number of feeders
installable: 108
・
Names of the models where the
feeders can be installed:
CM402-M/L
CM401-M/L
CM400-M
DT401-M/F
CM602-L
CM212-M
Feeder types & Applicable chips
*1 As for R, make contact with us in each case.
The orientation (the front or back side) of R
cannot be recognized.
*2 Shall be within our specifications.
Applicable package
・
EIAJ-standard bulk case.
■
Capacity by chip type
*
Capacity is change by manufacturer.
(Notice) When using bulk feeders, the machine needs the “Air supply unit for the feeder” (option).
36
110
12
ＬＷＴ
Par chip
Pae feeder
1005C B/F 1005C 1.0 ±0.05 0.5 ±0.05 0.5 ±0.05
21
0.5 88.5 177(Min 168)
1005R
 
B/F 1005R
1.0 ±0.05 0.5    *2 0.35 ±0.05
21
2354
177(Min 168)
1608C B/F 1608C
1.6 ±0.1 0.8 ±0.1 0.8 ±0.1
21
0.6 66
110(Min 103)
1608R B/F 1608R
1.6 ±0.1 0.8 ±0.1 0.45 ±0.1
21
2220110(Min 103)
2012C,t=0.6
 
B/F 2012C,t=0.6
2.0 ±0.1 1.25 ±0.1 0.6 ±0.1
21
2.5 220
88(Min 83)
2012C,t=0.85 B/F 2012C,t=0.85
2.0 ±0.1 1.25 ±0.1 0.85 ±0.1
21
2.5 220
88(Min 83)
2012C,t=1.25 B/F 2012C,t=1.25
2.0 ±0.1 1.25 ±0.1 1.25 ±0.1
21
1.5 132 88(Min 83)
2012R B/F 2012R *１
2.0 ±0.1 1.25 ±0.1 0.55 ±0.1
21
2.5 220 88(Min 83)
No. of chips
to be aligned
Feeder type
Applicable
chip type
Installation
pitch
(mm)
Chip dimensions (mm)
Chip aligning
time (s)
-0.02
+0.05
Chip type Capacity
1005C,t=0.5 50 000
1005R,t=0.35 50 000 to 100 000*
1608C,t=0.8 15 000
1608R,t=0.45 25 000
2012C,t=0.6 10 000
2012C,t=0.85 7 000 to 10 000*
2012C,t=1.25 5 000
2012R,t=0.55 10 000
Ｌ
Ｗ
Ｔ
* JIS/EIAJ-standard or its compliant.
B/F: Bulk Feeder
(Unit : mm)