CM602规格说明书（英文）.pdf - 第66页
CM602-L 2006.0515 - 61 - 12. Dimensions Model: CM602-L (Unit: mm) ∗∗ Remarks ∗∗ • T he above Ill ustratio ns do not s trictl y agree with the a ctual m achine in a reduc ed sc ale. W hen exam ining the lin e configurat i…
CM602-L 2006.0515
- 60 -
11. Electric / Pneumatic
11.1 Electric Source Unit
■
The power source should be connected with four-conductor cable of AWG#12 or larger.
(This cable is not included.)
■
The cable should be clamped in two points as the lower-left figure shows.
[Recommended]
1. Terminal connecting pin
Manufacturer: Weidmüller
Type: H4/20D or H6/20
2. Outside diameter dimensions of the cable
φ
13.5 mm to
φ
18.0 mm
3. Be sure to secure the cable with the cable clamps
so that it will not be moved by being pulled
(100 N) or turned.
11.2 Pneumatic Source Unit
∗∗
Remarks
∗∗
•
Please prepare the electric source cable of a customer.
■
Pneumatic Source unit
(Located inside the cover)
Coupler (Nittoh)
30PH
Reinforced tube
5 m
Socket (Nittoh)
30SH
CM602-L
Rear side of
the machine
Electric source unit
Terminal block
(Located inside the cover)
Cable clamp
Terminal
block
Cable
CM602-L
Front side of
the machine
CM602-L 2006.0515
- 61 -
12. Dimensions
Model: CM602-L
(Unit: mm)
∗∗
Remarks
∗∗
•
The above Illustrations do not strictly agree with the actual machine in a reduced scale.
When examining the line configuration, dimensions, etc., please ask for the materials for them.
2 690
1 575 1 115
1 255 735
225 685
850 1 330
340
965
87
73
Electric source
2 350
AIR
1 600
1 430
734 294
900
2 000
2 210
70
65 65
70
Worker side
CM602-L 2006.0515
- 62 -
■
Adjust Bolt Diagram
Model: CM602-L
(Unit: mm)
Electric source
Air
0.49 MPa to 0.78 MPa
980 175
520
175
Conveyor
reference
plane
1 850
85 85
1 020 1 020
2 210
Worker side