CM602规格说明书（英文）.pdf - 第37页

CM602-L 2006.0515 - 32 - ■ Direct Tra y Feeder DT50S-20 ( Option ) Installi ng the direc t tra y feeder DT 50S-20 onto C M602- L enables the plac ement of tray feedin g com ponents. DT50S-20 c an be installed on the rear…

100%1 / 74
CM602-L 2006.0515
- 31 -
Precautions in choosing the Shuttle Tray Feeder
In choosing the shuttle tray feeder, also the extension conveyor(s) and the like need to be chosen because
that projects from the side of CM602-L.
See the following figures for the installation examples and the extension conveyors to be chosen.
①
In installing to the downstream stage
Install the working conveyor to the
downstream.
(For CM602-L, the extension conveyor
supporting shuttle trays can be selected.)
②
In installing to the upstream stage
Install the working conveyor to the upstream.
(For CM602-L, the extension conveyor
supporting shuttle trays can be selected.)
③
In installing to the upstream of the
downstream CM602-L when two
CM602-L are coupled to each other
・
Install the downstream extension
conveyor to the upstream CM602-L.
・
Install the upstream extension conveyor
to the downstream CM602-L.
Shuttle tray feeder
Working conveyor
Downstream machine
PCB flow direction
Working conveyor
Shuttle tray feeder
Upstream machine
PCB flow direction
Shuttle tray feeder
Downstream extension conveyor
PCB flow direction
Upstream extension conveyor
CM602-L 2006.0515
- 32 -
■
Direct Tray Feeder
DT50S-20 (Option)
Installing the direct tray feeder DT50S-20 onto CM602-L enables the placement of tray feeding components.
DT50S-20 can be installed on the rear side (AR and BR) of CM602-L. It cannot be installed on the front side
(AF and BF). The direct tray feeder can be connected only to the stage of multi-functional head type.
When the direct tray feeder DT50S-20 is installed on a table of CM602-L, the feeder table (not attachable/
detachable) that holds a maximum of six feeders is installed next to the direct tray.
Type D-0, D-1 and E-0
Type F-0
Frontside
Rear side
AR
BR
Two DT50S-20s installed on CM602-L
DT50S-20
2727
Feeder table
(Four places)
20 6 20
27
27
27
Feeder table
(Four places)
20
6
CM602-L 2006.0515
- 33 -
Tray Conditions
・
Tray dimensions: The outside dimensions of tray shall satisfy the following conditions.
・
Component holding: Tray shall be capable of holding components, satisfying the following conditions.
Conditions of component Position error
Pick up face: Under 10 mm × 10 mm ±1.0 mm or less
Pick up face: 10 mm × 10 mm or over ±1.5 mm or less
* However, these conditions are valid only when the top of component has a flat pick up face.
Xw + Position erro
r
Yw + Position error
Tray setting reference point
(Tray origin)
Coordinates of component’s cente
r
(X, Y) = (Xw, Yw)
Tray
Pocket
Component
X
Y
Maximum tray dimensions
Minimum tray dimensions
Max. 335 mm
Min. 100 mm
Min. 85 mm
Max. 136 mm