00194547-03.pdf - 第54页
Installation Manual Station Software Version 601.02 SP1 Edition 10/2005 54 of 82 4.5.3.2 Installation procedure → Insert the "Rmos-1" floppy in the driv e of the MC and switch the station on. → The following me…
Installation Manual Station Software Version 601.02 SP1 Edition 10/2005
53 of 82
4.5.3 Installing the machine controller operating system
4.5.3.1 Creating the installation floppies
The two floppies for the machine controller operating system can be created on any Windows XP
computer equipped with a CD drive and a floppy drive. An image in the form of a self-extracting EXE
file is stored in the folder "RMOS_Images" of the CD with the Version 601.02 software for both of the
installation floppies. The numbers at the end of the file names (Rmos-1.exe, Rmos-2.exe)
correspond to the sequential number of the relevant floppy. You can create the floppies in any
sequence.
→ Insert the CD for version 601 of the software in the CD ROM drive.
→ Insert a formatted floppy (3.5", 1.44MB) into the floppy drive.
→ In the Windows Explorer, open the "RMOS_Images" folder on the CD.
→ Start the appropriate EXE file by double clicking it.
→ Follow the program instructions:
Insert the floppy. You may be asked whether the floppy can be deleted.
The floppy is written (the bar shows the progress).
→ When the window disappears, the floppy is finished (before removing the floppy, you must wait
until the 'active' light on the disk drive has gone out).
Notes:
- The system looks for a floppy in drive 'A': The floppy must therefore already be in the drive at the
start (this setting cannot be changed).
- You must use a formatted floppy.
(The program does not allow you to format the floppy as you create it.)
- Each time the EXE file is called it will create a single floppy.
- Before and during creation of each disk, no other tool may be permitted to access this floppy (e.g.
the current Explorer window, the path of a DOS box must not be set to the A: drive).
Installation Manual Station Software Version 601.02 SP1 Edition 10/2005
54 of 82
4.5.3.2 Installation procedure
→ Insert the "Rmos-1" floppy in the drive of the MC and switch the station on.
→ The following message will appear on screen
Starting MS-DOS...
DO YOU WANT TO CONTINUE INSTALLATION ?
[C] CONTINUE [R] REBOOT SYSTEM TO CHECK OR CHANGE SETUP
[T] TERMINATE BATCH PROCESS (Change to DOS)
PRESS KEY TO CONTINUE [C,R,T]
'C' continues the installation.
NOTE: If the error message "INVALID MEDIA TYPE" appears, you must respond with (f)ail (this
occurs several times; generally when formatting new hard disks); installation is then continued.
You can abort installation at this point by typing 'T'.
Installation Manual Station Software Version 601.02 SP1 Edition 10/2005
55 of 82
→ The installation program starts.
→ Press any key to continue or cancel with <Esc>.
The software version and the machine type are displayed.
→ Press any key to continue or cancel with <Esc>.
The main menu appears:
>>>
>>>
------------------Install Revision of SIPLACE Operating System
------------------
Terminate SIPLACE Installation Program
Main Menue of SIPLACE Installation MCRM3 40x.xx
Use the [Up Arrow] [Down Arrow] [Pg Up] [Pg Dn] keys to move the highlight bar to select the
button you prefer.
Press [Enter] to activate your selection
Note:
If a submenu or a function in the installation program is selected, the cursor flashes gray.
→ Select the function "Install Revision of SIPLACE Operating System" and confirm with
<RETURN>.