00197193-01_IM_SIPLACE_EDM_2_0_EN.pdf - 第60页
EDM V2.0 / Installation Manual Ausgabe 04/2012 Edition 6.3.6.22 Service remoting endpoint Key: serviceRemotingEndpoint Type: String Valid for: Line server Description: .NET remoting endpoint for communication between the…
EDM V2.0 / Installation Manual Ausgabe 04/2012 Edition
Description: Time period in which the Line Server considers a reply to a service request from
the Master Server to be valid. Timing problems can arise here due to the
interaction between SIPLACE Pro and XML Import/Export that may require a
change to be made. However, the timeout should not be set to a value too high
since this can cause the users to become very irritated.
The other options are as follows (from left to right):
Y = years
M = months
D = days
H = hours
M = minutes
S = seconds
6.3.6.20 Compression type and level
Key: compressionType
Type: Enum
Values: None
Zip
Bzip
Default: Zip
Valid for: Line server
Master server
Clearing pool
Description: Compression mode for the data transfer. The setting must be identical throughout
the entire system.
The default setting represents a good compromise between the compression ratio
and processing time. If extremely large amounts of data are transferred by the
customer, it may be necessary to set the compression to Bzip. This method offers
a much higher compression ratio than Zip, but at the cost of longer processing
times. Compression should only be switched off when the amount of data is always
very small (< 4MB).
Even though EDM tries to auto-detect the compression type it is strongly
recommended to use the same compression type in all configurations when
working with different SystemConfigurations for multiple config sets.
6.3.6.21 Client workflow configuration
Key: clientWorkflowConfig (Obsolete now part of the Configuration Set)
Type: File
Default: Clientworkflowconfig.xml
Valid for: -
Description: Definition of the workflow on the EDM Client. The file name is specified relative to
the configuration folder.
59
EDM V2.0 / Installation Manual Ausgabe 04/2012 Edition
6.3.6.22 Service remoting endpoint
Key: serviceRemotingEndpoint
Type: String
Valid for: Line server
Description: .NET remoting endpoint for communication between the EDM Client and EDM Line
Server. The entry has the format:
[servername]:[tcpport]/EdmService
6.3.6.23 Application template storage
Key: templateStorage
Type: Path
Default: [AppDir]\templateStorage
Valid for: Line server
Master server
Description: Storage location for application templates. The path can be specified absolutely or
relative to the EDM installation folder.
6.3.6.24 SQL database access
Key: sqlDataSource
Type: String
Valid for: Master server
Clearing pool
Data Transfer Manager
Description: Access to the SQL server to store the change notifications, the objects changed on
the lines and information on push mode (EDM database).
This setting does not refer to the SIPLACE Pro database.
6.3.6.25 SQL user name
Key: sqlUserName
Type: String
Valid for: Master server
Clearing pool
Data Transfer Manager
Description: User name for access to the SQL server.
60
EDM V2.0 / Installation Manual Ausgabe 04/2012 Edition
6.3.6.26 SQL password
Key: sqlUserPassword
Type: String
Valid for: Master server
Clearing pool
Data Transfer Manager
Description: Encrypted password for access to the SQL server. Use the “Configuration
Manager” (Advaned Settings – System Settings – SqlServerPassword) to change
the password (see 5.3.8).
6.3.6.27 Starting point
Key: startingPoints
Type: Section
Valid for: Master server
Description: Configures allowable starting points in the application template.
The entry has the format:
<objectServerType value="ObjectServerType"/>
6.3.6.28 Comment categories
Key: CommentCategories (Obsolete replaced by the CommentConfig.xml)
Type: Section
Valid for: -
Description: The entry has the format:
<category value="category"/>
6.3.6.29 Request configuration
Key: requestCommandConfig (Obsolete replaced by the RequestConfig.xml)
Type: Section
Valid for: -
Description: This section contains pairs of values in the form of:
<add key="[request]" value="[Class]"/>
There is one entry for each of the services provided by the Master Server. These
settings should only be changed by the developer since they depend on the
implementation of the Master Server, and improper settings can affect the integrity
and operation of the system as a whole.
61