00197975-06_UM_TX-Serie_EN.pdf - 第114页
3 Technical data and assemblie s User manual SIPLACE TX-Series 3.3 Dimensions and weight From s oftware version 713.0 Edition 01/ 2020 114 3.3 Dimensions and weight 3.3.1 T echnical data - dimensions and weight 3 Length …
User manual SIPLACE TX-Series 3 Technical data and assemblies
From software version 713.0 Edition 01/2020 3.2 Ambient conditions and connection values
113
3.2.4 Electrical ratings and energy consumption
3
PLEASE NOTE
Use of a residual current protection device
The low ground leakage current of the system makes it possible to use an upstream re-
sidual current protection device at the customer end. This must be all-current sensitive
(RCD type B).
Electrical ratings
Supply voltage Fuse
Main power supply 3 x 380 V~ to 3 x 415 V~ ± 10 %; 50/60 Hz
3 x 200 V~ to 3 x 220 V~ ± 10 %; 50/60 Hz
*a
3 x 16A characteristic C
3 x 15A characteristic C
*b
Mains power con-
nection
Without cable
Cable 5 x 2,5 mm² WITH CEE plug, red 16 A (in accordance with IEC 60309)
(3 x 380 V~ to 3 x 415 V~)
Cable 5 x 2,5 mm² WITHOUT connector (3 x 200 V~ to 3 x 220 V)
Short circuit rating of
placement machine (SCCR)
*c
10 kA
Energy consumption
With a vacuum pump
*d
Without vacuum pump
*e
Nominal apparent
power
2.6 kVA 2.3 kVA
Nominal active
power
2.2 kW 1.2 kW
*)a With options package
*)b For example: Siemens circuit breakers in accordance with UL 489 and IEC (order no.: 5SJ4 316-7HG42)
or
EATON Industries circuit breaker FAZ-C16/3-NA 16A 3p (UL 489, CSA C22.2 no. 5, IEC 60947-2)
*)c With the original mains connection cable. The marked short circuit rating (SCCR) relates to the beginning of the original mains
cable. In the case of customer modifications, the factory-set length of the mains cable to the placement machine may not be
shortened nor the factory-set conductor cross-section increased, as this would have a negative impact on the short circuit rating
(SCCR).
*)d Vacuum pump for C&P20 P2 head only.
*)e Optional
3 Technical data and assemblies User manual SIPLACE TX-Series
3.3 Dimensions and weight From software version 713.0 Edition 01/2020
114
3.3 Dimensions and weight
3.3.1 Technical data - dimensions and weight
3
Length
*a
Without conveyor extension and with hand guard
With input conveyor extension
*b
With output conveyor extension
With input and output conveyor extension)
1000 mm
1260 mm
1604 mm
1864 mm
Width
Outer contour of machine protection (table "inside")
With monitor
Outer contour of machine protection (table location 1 "outside")
Machine frame
2232 mm
2386 mm
2324 mm
2048 mm
Height of placement machine (for PCB conveyor height 950 mm)
Up to upper edge of machine protection
With 2-color indicator lamp
With 3-color indicator lamp
Without indicator lamp (height of packaging)
With folded-up short protective cover 45 degrees position
With folded-up short protective cover 60 degrees position
With folded-up short protective cover 45 degrees position
With folded-up short protective cover 60 degrees position
1500 mm
1690 mm
1735 mm
1500 mm
1960 mm
2070 mm
2050 mm
2175 mm
Floor clearance of placement machine
(for PCB conveyor height 900 mm)
(for PCB conveyor height 930 mm)
(for PCB conveyor height 950 mm)
120 mm ± 15 mm
150 mm ± 15 mm
170 mm ± 15 mm
Weight
SIPLACE TX-Series (placement machine with component trolley)
SIPLACE TX-Series (fully equipped with feeder modules)
2050 kg
2170 kg
Location
*c
With table on outside
2.23 m²
2.33 m²
Even surface load
Characteristic surface load
6.75 kN/m²
7.70 kN/m²
Number of machine feet 4
Max. noise emissions 75 dB (A)
*)a Measured at the outer contour of the machine protection.
*)b Only in the first placement machine of the line.
*)c Measured at the outer contour of the machine protection and without conveyor extension.
User manual SIPLACE TX-Series 3 Technical data and assemblies
From software version 713.0 Edition 01/2020 3.3 Dimensions and weight
115
3.3.1.1 Overview of dimensions
3
Fig. 3.3 - 1 Overview of dimensions - example SIPLACE TX2
Example:
(1) Length = 1000 mm
(2) Width = 2048 mm
(3) Height =
1735 mm