00197975-06_UM_TX-Serie_EN.pdf - 第278页
6 Station extensions User manual SIPLACE TX-Series 6.1 Nozzle changer From software version 713.0 Edition 01/2020 278 6.1.2.1 Nozzle changer for C&P20 P / C&P20 M2 with 4 magazines Item no. 031036 49-xx Nozzle ch…
User manual SIPLACE TX-Series 6 Station extensions
From software version 713.0 Edition 01/2020 6.1 Nozzle changer
277
6 Station extensions
For the relevant configurations and other options, refer to the individual specifications for the SI-
PLACE placement machines.
6.1 Nozzle changer
6.1.1 General
Nozzle changers can greatly increase the flexibility of the placement heads for processing differ-
ent types of component. If the placement program requires a nozzle change, then the placement
head automatically returns the old nozzle to the nozzle holder and picks up the new nozzle. Noz-
zles that were separated out during the vacuum check can also be quickly changed. It is signifi-
cantly more exact and faster to pick up nozzles from a nozzle changer than would be possible
manually. When placing small components, it is essential to minimize the radial eccentricity during
nozzle rotation.
6.1.2 Nozzle changer for SIPLACE SpeedStar C&P20 P /M2
This nozzle changer can accommodate 4 magazines, each with 20 nozzle garages. The maga-
zines are seated on a common support. They are centered with two parallel pins and fixed in place
with 4 push buttons. The exact position is determined with two fiducials on each magazine. The
correct seat of the magazines on the basic nozzle changer body is monitored by microswitches,
to prevent a collision of the placement head with any magazines projecting upwards. All magazine
locations must be filled since the safety circuit stops the placement machine in response to miss-
ing magazines or magazines that are not seated correctly. At the installed nozzle station, compo-
nents can be blown off the nozzles of the SpeedStar and nozzles stripped off and rejected.
6
CAUTION
Only use the nozzle changer together with the SpeedStar.
6 Station extensions User manual SIPLACE TX-Series
6.1 Nozzle changer From software version 713.0 Edition 01/2020
278
6.1.2.1 Nozzle changer for C&P20 P / C&P20 M2 with 4 magazines
Item no. 03103649-xx Nozzle changer basic assembly CP/all - short
Item no. 03101503-xx Nozzle magazine 40xx with 20 garages
6
Fig. 6.1 - 1 Nozzle changer for the SIPLACE SpeedStar C&P20 P / C&P20 M2 with 4 magazines
6.1.2.2 Technical data
6
Nozzle changer for the SIPLACE SpeedStar (C&P20 P / C&P20 M2)
Number of magazines per location
*a
SIPLACE TX
*)a All magazines in the nozzle changer must be configured.
4
Number of nozzle garages per location
SIPLACE TX 80
Standard configuration
SIPLACE TX per location 4 magazines with 80 nozzle garages
Nozzle types 40xx
User manual SIPLACE TX-Series 6 Station extensions
From software version 713.0 Edition 01/2020 6.1 Nozzle changer
279
6.1.2.3 Configuration example with SIPLACE C&P20 P / C&P20 M2
A nozzle changer with four magazines for the SpeedStar can be installed at both locations 1 and
2 (item 1 in fig. 6.1 - 2
, page 279).
6
Fig. 6.1 - 2 Position of nozzle changer for the SIPLACE SpeedStar - configuration example SIPLACE TX2i
6
6
NC CP20
Nozzle changer for C&P20 P or C&P20 M2 with 4 magazines
COT 40 In
Component trolley in the innermost position
PLEASE NOTE
The placement machine stops if magazines are missing
In the event of missing or incorrectly positioned magazines, the safety circuit will stop the
placement machine.
Use all magazine places.