00197975-06_UM_TX-Serie_EN.pdf - 第135页

User manual SIPLACE TX-Series 3 Technical data and assemblies From software version 713.0 Edition 01/2020 3.5 Placement head 135 3.5.4.8 T echnical data for SIPLACE MultiS tar (CPP) on SIPLACE TX 3 SIPLACE MultiStar (CPP…

100%1 / 346
3 Technical data and assemblies User manual SIPLACE TX-Series
3.5 Placement head From software version 713.0 Edition 01/2020
134
3.5.4.7 MultiStar in advanced Pick&Place mode with limited rotation
The MultiStar can place the entire component spectrum from 01005 to 50 mm x 40 mm in this
mode. The large components are picked up last, optically centered and then placed as first com-
ponents.
3
Fig. 3.5 - 9 MultiStar - mixed mode
K_BE Small component (see table 3.5 - 1, page 130)
M_BE_2 Medium sized component, type 2 (see table 3.5 - 1
, page 130)
G_BE Large component (see table 3.5 - 1
, page 130)
Type 30 Component camera, type 30
Type 33 Stationary component camera, type 33
1 ... 8 Order of components taken up
3
Neighboring segments of the CPP head are not able to take up components of types M_BE_2 and
G_BE if the diagonal length of these components is longer than 39.8 mm.
Type 30
K_BE
G_BE
Type 33
M_BE_2
User manual SIPLACE TX-Series 3 Technical data and assemblies
From software version 713.0 Edition 01/2020 3.5 Placement head
135
3.5.4.8 Technical data for SIPLACE MultiStar (CPP) on SIPLACE TX
3
SIPLACE MultiStar (CPP)
with component camera
type 30
With component camera
type 45
with component camera
type 33
(stationary camera)
Component range
*a
01005 to 27 mm x 27 mm 01005 to 15 mm x 15 mm 0402 to 50 mm x 40 mm
*b
Component spec.
Max height
*c
Max. height
*d
Min. lead pitch
Min. lead width
Min. ball pitch
Min. ball diameter
Min. dimensions
Max. dimensions
Max. weight
6.0 mm
8.5 mm
0.25 mm
100 µm
*e
/ 200 µm
*f
250 µm
e
/ 350 µm
140 µm
e
/ 200 µm
0.4 mm x 0.2 mm
27 mm x 27 mm
4 g
6.0 mm
8.5 mm
250 µm / 120 µm
*g
50 µm
140 µmm
70 µmm
0.11 mm x 0.11 mm
15 mm x 15 mm
4 g
11.5 mm
300 µm
150 µm
350 µm
200 µm
1.0 mm x 0.5 mm
50 mm x 40 mm
8 g
Set-down force 1.0 - 10 N 1.0 - 10 N 1.0 - 10 N
Nozzle types 20xx, 28xx 20xx, 28xx 20xx, 28xx
X/Y accuracy
*h
± 40 µm/3σ ± 40 µm/3σ ± 34 µm/3σ
Angular accuracy ± 0.20° / 3σ
*i
, ± 0.38° / 3σ
*j
± 0.18° / 3σ ± 0.14° / 3σ
Illumination level 5 5 6
*)a Please note that the placeable component range is also affected by the pad geometry, the customer-specific standards,
the component packaging tolerances and the component tolerances.
*)b A diagonal of 69 mm is possible during multiple measurements (e.g. 64 mm x 10 mm).
*)c CPP head: in low installation position (stationary component camera not possible).
*)d CPP head: in high installation position
*)e For components < 18 mm x 18 mm
*)f For components ≥ 18 mm x18 mm
*)g Only possible for components which are within the camera focal area of ± 1.3 mm.
*)h The accuracy values fulfill the conditions in the ASM scope of supply and services.
*)i Component dimensions between 6 mm x 6 mm and 27 mm x 27 mm.
*)j Component dimensions smaller than 6 mm x 6 mm.
3 Technical data and assemblies User manual SIPLACE TX-Series
3.5 Placement head From software version 713.0 Edition 01/2020
136
3.5.4.9 Technical data for SIPLACE MultiStar (CPP) on SIPLACE TX2i W
SIPLACE MultiStar (CPP)
With component camera type 30
Component range
*a
*)a Please note that the placeable component range is also affected by the pad geometry, the customer-
specific standards, the component packaging tolerances and the component tolerances.
01005 to 27 mm x 27 mm
Component spec.
Max height
*b
Max. height
*c
Min. lead pitch
Min. lead width
Min. ball pitch
Min. ball diameter
Min. dimensions
Max. dimensions
Max. weight
*)b CPP head: in low installation position (stationary component camera not possible).
*)c CPP head: in high installation position
6.0 mm
8.5 mm
250 µm
100 µm
*d
/ 200 µm
*e
250 µm
e
/ 350 µm
f
140 µm
e
/ 200 µm
f
0.4mm x 0.2mm
27 mm x 27 mm
4 g
*)d For components < 18 mm x 18 mm
*)e For components ≥ 18 mm x18 mm
Set-down force 1.0 - 10 N
Nozzle types 20xx, 28xx
X/Y accuracy
*f
*)f The accuracy values fulfill the conditions in the ASM scope of supply and services.
± 40 µm/3σ
Angular accuracy ± 0.20° / 3σ
*g
, ± 0.38° / 3σ
*h
*)g Component dimensions between 6 mm x 6 mm and 27 mm x 27 mm.
*)h Component dimensions smaller than 6 mm x 6 mm.
Illumination level 5