00197975-06_UM_TX-Serie_EN.pdf - 第289页
User manual SIPLACE TX-Series 6 Station extensions From software version 713.0 Edition 01/2020 6.1 Nozzle changer 289 6.1.3.6 Configuration Example with SIPLACE CPP / CPP M The locations 1 and 2 can each accommod ate a n…
6 Station extensions User manual SIPLACE TX-Series
6.1 Nozzle changer From software version 713.0 Edition 01/2020
288
6.1.3.5 Technical data
6
Nozzle changer for the SIPLACE MultiStar
Number of magazines per location
*a
SIPLACE TX 6 4
Max. number of nozzle garages per location
SIPLACE TX 6 48
or
69
Standard configuration per location
SIPLACE TX 6 3 magazines with 36 x 20xx nozzle garages
3 magazines with 60 x 20xx nozzle garages
b
1 magazine with 9 x 28xx nozzle garages
Nozzle types 10xx, 11xx, 12xx
20xx, 28xx
*)a All magazines in the nozzle changer must be configured.
User manual SIPLACE TX-Series 6 Station extensions
From software version 713.0 Edition 01/2020 6.1 Nozzle changer
289
6.1.3.6 Configuration Example with SIPLACE CPP / CPP M
The locations 1 and 2 can each accommodate a nozzle changer with two magazines for the CPP
head (item 1 in fig. 6.1 - 9
, page 289).
6
Fig. 6.1 - 9 Position of nozzle changer for the SIPLACE MultiStar - configuration example (SIPLACE TX1/TX2)
6
NC CPP
Nozzle changer for the CPP with 4 magazines
COT 40 In
Component trolley in the innermost position
COT 40 Out
Component trolley in the outermost position
IC
Stationary camera
6 Station extensions User manual SIPLACE TX-Series
6.1 Nozzle changer From software version 713.0 Edition 01/2020
290
6
6.1.3.7 Assembly
The nozzle changers are fixed to the COT insert.
Align the nozzle changer so that the sloping side points towards the COT insert.
6
6.1.3.8 Notes on operation
When you fill a magazine with a certain nozzle type for the first time, attach an adhesive label
to identify the type.
6
Open the locking plate and place the nozzles in the nozzle holders.
Close the locking plate so that the nozzles cannot drop out of the magazines.
6
6
Programming the nozzle changer is described in the SIPLACE Pro user manual.
PLEASE NOTE
The placement machine stops if magazines are missing
In the event of missing or incorrectly positioned magazines, the safety circuit will stop the
placement machine.
Use all magazine places.
WARNING
Risk of head crashes with mixed configurations!
There is a risk of head crashes with mixed configurations.
Only install the associated nozzle changer for each placement head, with the nozzle
magazines for the respective placement head.
PLEASE NOTE
Fill the magazines outside the placement machine and only replace complete mag-
azines.
CAUTION
Filling up magazines!
Before you fill magazines, make sure that all the nozzles on the Collect&Place head
have
been returned to their magazines.
PLEASE NOTE
Risk of jamming!
If components fall onto magazines, there is a risk that the locking plate could jam.
Do not allow components to drop onto the magazines.
You should therefore regularly clean the magazines and free locations.