00197628-02_VD_SIPLACE_Pro_12.1_DE_EN.pdf - 第12页
SIPLACE Pro V12.1 / Softw are Version Descriptio n Ausgabe 05/2015 Edition 12 4 Features of SIPLACE Pro 12. 1 If not different ly described, the f eatures of the previous SIPLACE Pro versions a re contained in SIPLACE Pr…
SIPLACE Pro V12.1 / Software Version Description Ausgabe 05/2015 Edition
11
3.2 Supported Feeder Types
The following feeders are supported by SIPLACE Pro:
– 4 mm – 104 mm X-feeder
– 2x8 mm X-feeder
– 16 mm XN-feeder
– Surftape AX (8 mm, 12 mm, 16 mm)
– LED feeder TE
LED feeder HS
– Glue Feeder
– SIPLACE JTF-S (X-series S and SX1/SX2 V2 only)
– SIPLACE JTF-M (X-series S, X4i S micron and SX1/SX2 V2 only)
– Arbitrary Carrier X (X-series only )
– Conveyor Tray Carrier X (X-series only)
– Carrier X (XTH) (X2, X3, X4 on location 2 and 4 only)
– Carrier SX (SX1/SX2 with Twin Head and CPP head only)
– FFI feeders:
Data IO RoadRunners
– IPTE Multi Stick Feeder:
IPTE multi stick 60 AX
IPTE multi stick XL80 AX
– Stick feeder with X-adapter
– Label feeder with X-adapter
– Reject conveyor with X-adapter
– Dip module for X-tables (LDU_X)
– MTC2 (X2, X3, X4 on location 2 and 4, X2 S, X3 S, X4 S on location 2)
– WPC5 / WPC6 (SX1/SX2, X-series S on location 2)
– SIPLACE Wafer Systems (CA-series only)
– Splice sensor X-feeder
SIPLACE Pro V12.1 / Software Version Description Ausgabe 05/2015 Edition
12
4 Features of SIPLACE Pro 12.1
If not differently described, the features of the previous SIPLACE Pro versions are contained in
SIPLACE Pro 12.1. The main features of SIPLACE Pro 12.1 are listed below.
NOTICE
Detailed information about the single functions can be found in the Online Help for
SIPLACE Pro.
4.1 Reading Individual Barcode Fiducials with Board Camera
For traceability purposes, many components have a 2D-barcode on top of itself or next to the
component pocket at the tape.
As of this SIPLACE Pro version, such individual barcode fiducials can be read by the board camera
during pickup and then assigned to the placement position (Reference Designator) in the provided
traceability data.
Prerequisites
– Station Software Version 708.1 or higher is required.
– The "Reading Barcode recognition with PCB Camera" license is available and enabled.
– Traceability is enabled.
The option has to be enabled in the Component Editor.
Figure 4-1: Enabling individual barcode
SIPLACE Pro V12.1 / Software Version Description Ausgabe 05/2015 Edition
13
The barcode fiducial and its offset have to be defined in the Component Shape Editor or
Component Editor. These settings are defined per feeder type.
Figure 4-2: Defining individual barcode fiducial
The Component Package Editor has been extended accordingly.
When a component is set up on a table, these settings will be copied to the pickup location and can
be modified there too. In the drawing the individual barcode fiducial will be displayed in the pocket
with its real size and offset.
The position of the individual barcode fiducial can be taught on the station and uploaded to
SIPLACE Pro, where it will be stored in the "Fiducial Offset X/Y" properties of the pickup position in
the setup.
The origin of the barcode position is the center of the feeder pocket.
The Setup Functions in the Data Maintenance Tool have been extended so that the user can
transfer the uploaded individual barcode fiducial position from the setup to the component or
component shape. Different values will be displayed in a dialog:
Figure 4-3: Updating barcode fiducial from Setup
Figure 4-4: Confirming uploaded fiducial data