M3plus_MaintenanceManual_e.pdf - 第10页
v Before starting work WA R N ING Do not put In hand through openIng. MovIng parts can pInch hand. Possible injuries from getting caught between moving parts 23001-5E-2J w WARNING Never place hands in the machine during …
iv
Before starting work
1.3 Warning labels
The following warning labels are affixed to the machines. Check the information on the label and always follow
its instructions. This section explains warning labels affixed to surface mounters and all other related machines
including dispensers, solder paste printers and peripheral equipment.
w
WARNING
WARNING
CLOSE COVER WHILE OPERATING
Possible injury
Safety cover
23001-5E-2A
w
WARNING
Keep the safety cover closed during machine operation. Injuries might occur from touching moving parts during operation
while the safety cover is still open.
WARNING
DO NOT TOUCH THIS SWITCH
MOVING MACHINE MAY CAUSE INJURY
Possible injury
Safety cover switch
23001-5E-2B
w
WARNING
Do not touch the safety cover switch during machine operation. Injuries might occur from touching moving parts during
operation with the safety cover switch deactivated.
1. Safety
v
Before starting work
WARNING
Do not put In
hand through
openIng.
MovIng parts can
pInch hand.
Possible injuries from getting caught between moving parts
23001-5E-2J
w
WARNING
Never place hands in the machine during operation. Hand or fingers might be caught between moving parts and covers,
causing serious injuries.
Possible injuries from touching internal parts
WARNING
Gears and cutters can
cause severe personal injury.
Tu r n power off before
servicing or cleaning.
23001-5E-2M
w
WARNING
Do not put your hands into the machine while the power is turned on. Hand or fingers might be caught in gears or cut by
cutter blades, causing injuries.
1. Safety
vi
Before starting work
c
CAUTION
HIGH VOLTAGE!
Electrical shock hazard
23001-5E-2C
c
CAUTION
Use caution since electrical shocks might occur from touching or coming in contact with the power supply section inside
the panel.
HOT!
Possible burns if touched
23001-5E-2D
c
CAUTION
The motor becomes extremely hot during and shortly after operation, so do not touch it!
Possible loss of eyesight
LASER BEAM
Do not stare into laser beam!
Max. output:1 mW, Pulse width: 1ms max.
Semiconductor laser (wavelength: 685nm)
Class 2 laser product
LASER BEAM EXIT
23001-5E-2E
c
CAUTION
Looking directly into the laser beam may cause loss of eyesight.
1. Safety