M3plus_MaintenanceManual_e.pdf - 第11页
vi Before starting work c CA UTION HIGH V OL T A GE! Electrical shock hazard 23001-5E-2C c CAUTION Use caution since electrical shocks might occur from touching or coming in contact with the power supply section inside t…
v
Before starting work
WARNING
Do not put In
hand through
openIng.
MovIng parts can
pInch hand.
Possible injuries from getting caught between moving parts
23001-5E-2J
w
WARNING
Never place hands in the machine during operation. Hand or fingers might be caught between moving parts and covers,
causing serious injuries.
Possible injuries from touching internal parts
WARNING
Gears and cutters can
cause severe personal injury.
Tu r n power off before
servicing or cleaning.
23001-5E-2M
w
WARNING
Do not put your hands into the machine while the power is turned on. Hand or fingers might be caught in gears or cut by
cutter blades, causing injuries.
1. Safety
vi
Before starting work
c
CAUTION
HIGH VOLTAGE!
Electrical shock hazard
23001-5E-2C
c
CAUTION
Use caution since electrical shocks might occur from touching or coming in contact with the power supply section inside
the panel.
HOT!
Possible burns if touched
23001-5E-2D
c
CAUTION
The motor becomes extremely hot during and shortly after operation, so do not touch it!
Possible loss of eyesight
LASER BEAM
Do not stare into laser beam!
Max. output:1 mW, Pulse width: 1ms max.
Semiconductor laser (wavelength: 685nm)
Class 2 laser product
LASER BEAM EXIT
23001-5E-2E
c
CAUTION
Looking directly into the laser beam may cause loss of eyesight.
1. Safety
vii
Before starting work
1. Safety
DON'T
TOUCH
Do not touch camera unit.
DO NOT TOUCH
23001-5E-2F
c
CAUTION
Do not touch the camera unit or apply impacts since this will adversely affect component mounting operation.
Make correct connections.
23001-5E-2K
c
CAUTION
Wrong connections or wiring methods other than specified might damage the machine. Always make correct connections
by complying with the specified wiring methods.
Do not use any solvent other than specified.
23001-5E-2L
c
CAUTION
Using other than the specified solvents might damage the machine or create a fire hazard.