M3plus_MaintenanceManual_e.pdf - 第53页
在线预览 M3plus_MaintenanceManual_e.pdf PDF 文档。
3-13
3
Periodic maintenance items
4
Blow air into the spline from the top.
After cleaning with alcohol, insert the air blow gun
into the air joint blow air while placing cloth just
under the lower end of the head.
43312-5E-20
5
Blow air into the spline shaft from the
bottom.
Insert the air blow gun into the nozzle holder, and
blow air while placing cloth over the air joint at the
top of the alpine shaft.
43313-5E-20
6
Check the vacuum level.
On the operation display, open the [Unit]-[Head]
tab screen and press the [Vacuum] button to
generate a vacuum. Then check the current
vacuum level shown on the screen. When this
value is smaller than 80, cleaning of the spline shaft
is satisfactory.
Blowing air from the top
Step 4
Air blow gun
Air joint
Blowing air from the bottom
Step 5
Cleaning paper or cloth
Air blow gun
3. 6-month inspection
Chapter 4
How to replace consumable parts
Table of Contents
1. Nozzle leaf springs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1
2. Ejector valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
3. Conveyor belt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3