M3plus_MaintenanceManual_e.pdf - 第27页
1- 8 1 Maintenance 2.3 Required tools Prepare the following tools and items necessary for maintenance. Name Description Tool list Option Large, small Large, small #0, #1 1 set Used to replace ejector filters. Used to sup…
1-7
1
Maintenance
2.2.2 Oil filling tools and grease
Grease gun
Oil filling and greasing tools
Optional parts
Lithium-based grease
(not for use on heads)
Oil syringe applicator for nozzle holder
43105-5E-20
Lithium-based grease
Oil syringe applicator for nozzle holder
Grease gun
LRL No.3 50g
Turbine oil VG32
PH-100
K48-M3851-10X
KV8-M8870-00X
K48-M3852-00X
GREASE PACK
SYRYNGE OIL
GREASE GUN
Product Name Note
Parts No.Parts List Designation
Oil filling and greasing tools
Optional parts
45105-5E-20
2. Preparing for maintenance tasks
1-8
1
Maintenance
2.3 Required tools
Prepare the following tools and items necessary for maintenance.
Name Description
Tool list
Option
Large, small
Large, small
#0, #1
1 set
Used to replace ejector filters.
Used to supply turbine oil (VG32).
Used to apply grease to an axis, etc.
Used to blow air onto a nozzle, etc.
Used to clean nozzles.
Phillips screwdriver
Slotted screwdriver
Phillips precision screwdriver
Hex wrench set
Tweezers
Nozzle holder lubricating syringe
Grease gun
Air blow gun
Ultrasonic cleaner
45107-5E-20
Name Description
Other tool list
Used to lubricate ball screws and guides other than head assembly.
Used to lubricate nozzle holders and nozzles.
Use cleaning paper that does not leave dust, grit or residue.
Use IPA (iso-propyl alcohol) or ethanol.
Used for cleaning spline shaft.
Used for cleaning nozzle holders.
Used for marking when replacing conveyor belt.
Used to clean half mirror and lighting unit.
Used to clean the lens of multi-vision camera.
Used to clean the camera lighting unit.
Grease (lithium-based grease)
Turbine oil (VG32)
Cleaning paper
Cleaning alcohol
Paper cup or tray
Film container or equivalent
Marker pen
Cotton swab stick
Lens cleaner
Lens blow brush
45108-5E-20
2. Preparing for maintenance tasks
Chapter 2
Daily maintenance items
Table of Contents
1. Checking the nozzle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
1.1 Check with software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
1.2 Checking the nozzles visually . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
2. Checking the nozzle leaf springs . . . . . . . . . . . . . . . . . . 2-4
3. Checking the nozzle spring action . . . . . . . . . . . . . . . . . 2-5
4. Cleaning the feeder plate . . . . . . . . . . . . . . . . . . . . . . . . . 2-6
5. Cleaning the camera lighting unit . . . . . . . . . . . . . . . . . . 2-7