00198271-02_UM_ShuttleExtensionTX_EN.pdf - 第15页
Assembly and User Manual 1 Introduction Shuttle Extension Edition 06/2017 1.2 Overview 13 1.2.8 Important information about environmen tally-friendly dispo sal SIPLACE equipm ent are pr eferably m anufacture d using m at…
1 Introduction Assembly and User Manual SIPLACE TX
1.2 Overview Shuttle Extension Edition 06/2017
12
1.2.7 Failure to use as prescribed
Failure to use the product as prescribed can result in both danger to life and limb and material
damage. For this reason, used other than as prescribed is expressly prohibited. In the case of in
-
correct usage, ASM Assembly Systems GmbH & Co. KG will not assume liability for any damage
which occurs and will not guarantee the correct and proper function of machine components.
Use of the machine other than as prescribed includes, for example
– Operation of the Shuttle Extension TX with safety equipment deactivated or removed.
– Use of unauthorized accessories and additional modules.
– Use of the Shuttle Extension TX by unqualified personnel.
– Operation of the placement machine without a hand guard on the board conveyor.
– Persons standing on the top lid and cover plates.
– The use of wet cleansing tissues
Assembly and User Manual 1 Introduction
Shuttle Extension Edition 06/2017 1.2 Overview
13
1.2.8 Important information about environmentally-friendly disposal
SIPLACE equipment are preferably manufactured using materials and parts that can be easily
separated and disposed of in an environmentally-friendly way.
1
1.2.9 Electromagnetic compatibility (EMC)
SIPLACE equipment are designed and tested for professional use in industrial applications. Elec
-
tromagnetic compatibility in terms of the emission of interference cannot be guaranteed in any
other environment.
1.2.10 Note on original SIPLACE accessories
1
PLEASE NOTE
Correct and environmentally-friendly disposal by the operator
The owner of the system has sole responsibility for the proper environmentally-friendly
disposal of machines, working materials, consumables and wear parts.
Please observe your national statutory provisions for waste disposal and environ
-
mental protection.
PLEASE NOTE
Use of original spare parts and authorized accessories
The use of other parts will affect safety and will invalidate the liability for any consequen
-
tial damage.
Only use original spare parts and authorized accessories from ASM Assembly Sys
-
tems GmbH&Co.KG.
1 Introduction Assembly and User Manual SIPLACE TX
1.3 Technical Data Shuttle Extension Edition 06/2017
14
1.3 Technical Data
1
Dimension Shuttle Extension (see in fig. 1.4 - 1, page 15)
Length 1 440 mm
Width 1 691.6 mm
Height at a conveyor height of 950 mm 1 1162.5 mm
Weight 1 80 kg
Dimension Shuttle Extension with Barcode Reader Extension (see in fig. 6.1 - 2
, page 66)
Length 1 647 mm
Width 1 691.6 mm
Height at a conveyor height of 950 mm 1 1162.5 mm
Weight 1 105 kg
Overall
Nominal voltage 42 V and 24 V
Full-load current 0,8 A and 1,5 A
Max. noise emissions 75 dB (A)
Ampere rating of largest motor 2 A
Short circuit rating of machine (SCCR) 0.5 kA
Power 0.033 kW and 0.036 kW
PCB thickness 0.3 mm to 4.5 mm
PCB width
Single conveyor 1 45 mm to 460 mm
Dual conveyor 1 45 mm to 260 mm
PCB length 45 mm to 375 mm
PCB weight max. 2 kg
PCB detection LED light barriers
TX conveyor rail positions/PCB width Transport rail Position 231 => Distance between
fixed rail (outer position) 462 mm => PCB width
210 mm
Transport rail Position 268 => Distance between
fixed rail (outer position) 536 mm => PCB width
250 mm
Transport rail Position 281 => Distance between
fixed rail (outer position) 562 mm => PCB width
260 mm