00198271-02_UM_ShuttleExtensionTX_EN.pdf - 第28页
2 Operational safety Assembly and User Manual 2.2 Warning labels Shuttle Extension Edition 06/2017 26 2.2.1 Warning label W 203 2 W 203 in fig. 2.2 - 1 , page 22 , 2.2 - 2 , page 23 and 2.2 - 4 , page 25 , item no . 0300…
Assembly and User Manual 2 Operational safety
Shuttle Extension Edition 06/2017 2.2 Warning labels
25
Fig. 2.2 - 4 Warning labels inside the Shuttle Extension TX - part 2
(1) Warning strips on the hand guard
Item W 203, item no. 03009342-xx
2
WARNING
Damage to warning labels!
The warning labels can be damaged or destroyed by abrasive cleaning agents or sol
-
vents.
Do not use abrasive cleaners or solvents for cleaning warning labels.
Replace any damaged or illegible warning labels.
(1)
W 203
W 203
2 Operational safety Assembly and User Manual
2.2 Warning labels Shuttle Extension Edition 06/2017
26
2.2.1 Warning label W 203
2
W 203 in fig. 2.2 - 1, page 22, 2.2 - 2, page 23 and 2.2 - 4, page 25, item no. 03009342-01
(Quantity per Shuttle Extension TX: 8)
2.2.2 Warning label W 204
2
W 204 in fig. 2.2 - 1, page 22 and 2.2 - 2 page 23, Item no. 03009343-01
(Quantity per Shuttle Extension TX: 2)
2.2.3 Warning label W 210
2
W 210 in fig. 2.2 - 1, page 22, item no. 03009350-01
(Quantity per Shuttle Extension TX: 1)
2
2
2
Danger of crushing
Reaching in here can lead to injuries to the arms and hands.
Do not reach into the Shuttle Extension TX while it is running.
Do not reach into the inside of the neighboring machine.
2
2
2
Danger of crushing
Reaching in here can lead to injuries to the arms and hands.
Do not reach into the Shuttle Extension TX while it is running
2
2
2
2
2
2
Warning label on the EMERGENCY STOP button
Assembly and User Manual 2 Operational safety
Shuttle Extension Edition 06/2017 2.2 Warning labels
27
2.2.4 Warning strips on the hand guard of the conveyor
2
A black-yellow warning strip is attached to the hand guard, above the conveyor. Item 1 in the fig.
2.2 - 4
, page 25.
(Quantity per Shuttle Extension TX: 2)
This warns the operator not to reach into the inside of the neighboring machine.
2
2.2.5 Label - External grounding point
2
Label - External grounding point in fig. 2.2 - 3, page 24, item no. 00359574-xx
(Quantity per Shuttle Extension TX: 1)
2.2.6 Label - Ground
2
Label - Ground in fig. 2.2 - 3, page 24, item no. 00359574-xx
(Quantity per Shuttle Extension TX: 1)
DANGER
Risk of injury when top cover open!
There is a risk of injuries if you reach into the hazard area of the neighboring machine
when the top cover is open. This area is marked with black-and-yellow warning strips.
Take care not to reach into the hazard area of the neighboring machine when the top
cover is open.
2
2
2
Risk of hand injuries (crushing) over an extensive area
Reaching in here can lead to injuries to the arms and hands.
Do not reach into the inside of the neighboring machine.
2
2
2
External grounding point
Please observe chapter 2.4 ESD guidelines.
2
2
2
Ground
All ground termination points must be connected.