00198271-02_UM_ShuttleExtensionTX_EN.pdf - 第21页
Assembly and User Manual 2 Operational safety Shuttle Extension Edition 06/2017 2.1 Safety instructions 19 2 Operational safety 2.1 Safety instructions 2.1.1 Conventions for the use of hazard symbols This manual contains…
1 Introduction Assembly and User Manual SIPLACE TX
1.5 Important notes on the user manual Shuttle Extension Edition 06/2017
18
Registering for access to the User Group is easy:
Click on ’Register now’.
Complete the registration form and just send it off.
You will then quickly receive access authorization with USER ID and a password.
1.5.6 Abbreviations
1
DC Dual conveyor
ESD Electrostatically-sensitive group of components
EMC Electromagnetic compatibility
ESD Electrostatic sensitive device
GND Ground
I-Placement Independent placement
PCB Printed circuit board
Assembly and User Manual 2 Operational safety
Shuttle Extension Edition 06/2017 2.1 Safety instructions
19
2 Operational safety
2.1 Safety instructions
2.1.1 Conventions for the use of hazard symbols
This manual contains notes that must be observed to guarantee your personal safety and to avoid
damage to equipment. These notes are highlighted by warning triangles and are indicated as fol
-
lows according to the level of risk:
2
2
2
2
2
DANGER
Definition
Danger, as used in this manual, means that death, severe injury or considerable damage
to equipment will occur if the danger instructions are not followed.
WARNING
Definition
Warning, as used in this manual, means that death, severe injury or considerable dam
-
age to equipment may occur if the warning instructions are not followed.
CAUTION
Definition
Caution, as used in this manual, means that slight injury or damage to equipment may
occur if the caution instructions are not followed.
PLEASE NOTE
Definition
A note, as used in this manual, provides information on the product or indicates a part of
the manual that requires particular attention.
2 Operational safety Assembly and User Manual
2.1 Safety instructions Shuttle Extension Edition 06/2017
20
2.1.2 Qualified personnel
Qualified or adequately trained personnel means that these people are familiar with the installa
-
tion, setting up, operation and preventive maintenance of placement machines and add-on de
-
vices and are suitably qualified, e.g.
– have been trained, instructed or authorized to switch on and off, isolate, earth and identify
electrical circuits and system components in accordance with normal safety standards.
– have been trained or instructed in the upkeep and use of appropriate safety equipment in ac
-
cordance with normal safety standards.
2.1.3 Important notes on operational safety
The following points MUST be observed in order to maintain operational safety:
2.1.3.1 General
The operational safety of Shuttle Extension TX can be guaranteed only if the system is used
as prescribed and in accordance with the instructions in the user manuals.
Always follow any safety regulations specific to your country.
Make sure that the warning labels are always clearly identifiable and always easily readable.
Replace any damaged warning or notice labels. Replace any labels that are missing.
If it is necessary to work on the SIPLACE TX machine and you do not have adequately trained
personnel within your operation, always call in a ASM Assembly Systems GmbH&Co.KG
service engineer! ASM Assembly Systems GmbH&Co.KG will not accept liability for any
damage or consequential damage that is the result of unauthorized/incorrect work.
If particularly hazardous situations are identified while the SIPLACE TX and the Shuttle
Extension TX are in use, the machine owner must immediately notify the manufacturer in writ
-
ing so that appropriate action can be taken to reduce the potential danger.