JO-116-001_w.pdf - 第15页
JO-1 16 Safe-6 Notes on Use (continued) NOTICE Do not use any unspecied feeders. Conrm that the hook at the end of the tape feeder is securely engaged and the suppressor is not set aoat. When there is a problem with t…
JO-116
Safe-5
Notes on Use
WARNING
Those who wear implanted pacemakers should not handle the
tape feeders.
Permanent magnets are used in the tape feeders. The
pacemaker may be affected by the magnetism, causing a
serious accident.
CAUTION
If the tape feeder is dropped, it might injure your foot or the
feeder itself be damaged.
Handle one by one carefully and take care not to drop.
No person other than the machine operator is allowed to enter the
work area.
When you install or uninstall a tape feeder, avoid getting your
ngers caught in the feeder xing clamp.
In case of a disaster of any kind, earthquake, storm, ood, re, or
lightning, immediately stop to use the feeder adjusting jig and turn
off the power supply.
Carefully handle the master tapes.
The master tapes are made of a thin metal. Avoid cutting your nger
with the tape edges.
1105-001
2. Common Precautionary Items
Safety Precautions
JO-116
Safe-6
Notes on Use (continued)
NOTICE
Do not use any unspecied feeders.
Conrm that the hook at the end of the tape feeder is securely
engaged and the suppressor is not set aoat.
When there is a problem with the feeder adjusting jig, locate the
cause and assess the condition. If necessary, set the breaker of the jig
to "OFF" (Power OFF).
After the problem has been rectied completely, reset the jig to its
normal condition.
Do not give a strong shock to the micrometer by hitting against
part of human body or an object. Otherwise, the micrometer may
be damaged, resulting in inaccurate adjustment of the component
pickup position.
1105-001
2. Common Precautionary Items
Safety Precautions
JO-116
Safe-7
3. Alert Labels
The alert labels (described below) are used for this jig.
Please read the instructions on each label carefully and check the contents, observing the
actual object.
Be sure to follow the instructions for safety purposes.
These labels should be kept clean and easily legible at a far safe distance.
When a label has deteriorated and become illegible, contact our service department for
the replacement with a new one.
Location of Alert Labels
The alert labels are afxed on dangerous and caution-required areas.
Refer to "Alert Labels and Description" for details.
(1)
Rear Side of Electrical Box
(2)
(4)
(3)
1105-001
3. Alert Labels
Safety Precautions