JO-116-001_w.pdf - 第53页
3-4 JO-1 16 1.2 Password Change 1 105-001 (4) When the entered password matches the previously stored password, the "Password" window appears, enabling you to change the password. ( When a wrong password is ent…
3-3
JO-116
1.2 Password Change
1105-001
1.2 Password Change
Procedure
(1) Press the [Authority Setting] button located on the upper right
corner of the "Type Listup" window.
Fig. C3
(2) The "Password" window appears. Enter the password (for
"Administrator") through keyboard navigation. After the entry is
completed, press the [OK] button.
Factory-Specied Passwords
Administrator
: bbb
Power User
: aaa
Fig. C4
(3) Press "
". Be sure not to select the [OK] button.
Fig. C5
3-4
JO-116
1.2 Password Change
1105-001
(4) When the entered password matches the previously stored
password, the "Password" window appears, enabling you to
change the password.
(
When a wrong password is entered, nothing appears.)
Fig. C6
(5) Tick the "New Password (Administrator)" check box and enter a
new password.
Enter the same password in the "Conrmation" text ox for the
conrmation and press the [OK] button
Note
Follow the same procedure for "Power User".
Both passwords (for "Administrator" and "Power User") can
also be changed at the same time.
Fig. C7
3-5
JO-116
1.2 Password Change
1105-001
(6) When a new password matches one entered in the "Conrmation"
textbox, the "Password Change" dialog box opens. Press the [OK]
button to change the password(s).
Fig. C8
Notice
•
When a check box is not ticked, the password entered in the
corresponding text box becomes invalid.
•
When the text box is left blank (no characters entered), it is
also regarded as a password.
•
When the same password is used for both "Administrator"
and "Power User", it is regarded as one for "Administrator".
•
Enter only alphanumeric characters.
Note that passwords are always case sensitive (sensitive to
uppercase and lowercase letters).
•
Up to 16 alphanumeric characters can be entered.