JO-116-001_w.pdf - 第16页
JO-1 16 Safe-7 3. Alert Labels The alert labels (described below) are used for this jig. Please read the instructions on each label carefully and check the contents, observing the actual object. Be sure to follow the ins…
JO-116
Safe-6
Notes on Use (continued)
NOTICE
Do not use any unspecied feeders.
Conrm that the hook at the end of the tape feeder is securely
engaged and the suppressor is not set aoat.
When there is a problem with the feeder adjusting jig, locate the
cause and assess the condition. If necessary, set the breaker of the jig
to "OFF" (Power OFF).
After the problem has been rectied completely, reset the jig to its
normal condition.
Do not give a strong shock to the micrometer by hitting against
part of human body or an object. Otherwise, the micrometer may
be damaged, resulting in inaccurate adjustment of the component
pickup position.
1105-001
2. Common Precautionary Items
Safety Precautions
JO-116
Safe-7
3. Alert Labels
The alert labels (described below) are used for this jig.
Please read the instructions on each label carefully and check the contents, observing the
actual object.
Be sure to follow the instructions for safety purposes.
These labels should be kept clean and easily legible at a far safe distance.
When a label has deteriorated and become illegible, contact our service department for
the replacement with a new one.
Location of Alert Labels
The alert labels are afxed on dangerous and caution-required areas.
Refer to "Alert Labels and Description" for details.
(1)
Rear Side of Electrical Box
(2)
(4)
(3)
1105-001
3. Alert Labels
Safety Precautions
JO-116
Safe-8
Alert Labels and Description
No. Alert Labels and Description
(1)
Description
This label indicates that high voltage is applied.
Do not touch any part of the labeled section to avoid an electric shock.
(2)
Description
Avoid getting your ngers caught in this
An injury will result.
(3)
Description
Class 2 Laser Product
Do not expose your eyes directly the laser radiation.
(4)
Description
Please read this instruction manual carefully for correct use of the jig.
1105-001
3. Alert Labels
Safety Precautions