JO-116-001_w.pdf - 第31页

1-2 JO-1 16 2. Specications 1 105-001 T able A1-2 4. Applicable Feeder T ape Feeders for GXH-1 Series GT -08080, 08081, 08082 GT -12160 GT -24320 GT -44560 GD-08080, 08081, 08082 GD-12160 GD-24320 GD-44560 T ape Feeders…

1-1

JO-116

1. Outline

This adjusting jig can be used to measure the pickup position and write the

offset data in the memory of the feeder in order to maintain the accuracy and

reliability of the feeder.

2. Specications

Table A1-1

1. Model Name JG-0209E

2. Function This jig makes it possible to perform the following measurements and write the

offset data.

Measurement of Component Pickup Position and Writing of Offset Data

for Tape Feeders

•

Lane Origin Offset

(Lanes #1 and #2 for 8 mm Tape Feeder)

•

Offset Data X, Y, and Z

Notes

: (a) The master tape is required for the measurement of the X/Y

data.

(b) The following apparatuses are required for the measurement

of the Z data. These apparatuses are not included in this

feeder adjusting jig.

These apparatuses should be prepared in your company.

•

Block Gauge (104.0 mm)

•

Pry-Type Dial Gauge (0.01 mm)

•

Stand (used for the pry-type dial gauge)

•

Surface Plate (300 mm

300 mm or more)

3. Construction of

Device

•

Personal Computer for Data Writing

: DELL Optiplex Series (incl. Mouse and Keyboard)

(Operation System (OS) : Microsoft Windows 7)

•

Software for Data Writing

: Feeder Project Tester

•

Liquid Crystal Display

: DELL E Series

•

Pickup Position Camera

•

Pickup Position Camera Control Unit (Power Supply for LED Illumination)

: Analog Power Supply PSB-1012V-WW

•

Micrometer

•

Micrometer Unit (Measured Data Transfer Unit)

: Multiplexer MUX-10F

•

Electrical Box

: 220 V

10% AC

•

Measuring Jig

1. Outline

1105-001

1-2

JO-116

2. Specications

1105-001

Table A1-2

4. Applicable Feeder

Tape Feeders for GXH-1 Series

GT-08080, 08081, 08082

GT-12160

GT-24320

GT-44560

GD-08080, 08081, 08082

GD-12160

GD-24320

GD-44560

Tape Feeders for GXH-3 Series

GT-18080, 18081, 18082, 18083

GT-12161

GT-24321

GT-44561

GD-18080, 18081, 18082, 18083

GD-12161

GD-24321

GD-44561

Tape Feeders for SIGMA-G4/G5

GT-28080, 28081, 28082, 28083

GT-12162

GT-24322

GT-44562

GT-72002

GT-88002

GD-28080, 28081, 28082, 28083

GD-12162

GD-24322

GD-44562

(GD-72002)

(GD-88002)

5. Pickup Position

Camera

1/4-inch CCD 640

480 pixel (Monochrome)

View Size : Y=3.6 mm X=2.7 mm

Screen Size : Master Setting Window 1.2 times

Measurement Window 0.85 times

Camera Window 1.6 times

(Magnication:"640

480 pixel" regarded as "1")

6. Micrometer Unit Mu1tiplexer: MUX-10F

Set the rotary switch to "[6]" before use.

1-3

JO-116

2. Specications

1105-001

Table A1-3

7. Environmental

Condition

Temperature : 20

Humidity : 30 to 80 % (Avoid dew condensation)

Note

: When the ambient temperature rises more than the surface of the

machine, dew may condense under the condition described below.

Note that dew condensation may cause the machine to break down.

Condition of Dew Condensation

Dew may condense when the differences (based on "Humidity (%)")

between the ambient and the surface temperatures of the machine reach

the values or more in the table below.

Humidity

(%)

Differences between Ambient and Surface

Temperatures of Machine (Ambient

Temperature > Surface Temperature)

80 3

C or more

70 6

C or more

60 8

C or more

50 10

C or more

40 14

C or more

30 18

C or more

8. Power Supply

•

220 V

10% AC Single-Phase, 50/60Hz

Note

: When you purchase this jig, designate the power supply to be used.

Consu1t the marketing department or sales agency of Hitachi High-

Technologies for details

Ref.

: Because of momentary vo1tage drop due to a power breakdown or

falling of a thunderbo1t, the PC might be broken down or software

or data might be damaged. The AC uninterruptive power supply is

recommended to prevent momentary vo1tage drop.

9. Power

Consumption

Approx. 200 W

10. Dimensions

•

Personal Computer for Data Writing (DELL Optiplex Series)

185 (Width)

414 (Depth)

436 (Height) mm

•

Micrometer Unit (Measured Data Transfer Unit)

91.4 (Width)

92.5 (Depth)

50.4 (Height) mm

•

Electrical Box

200 (Width)

330 (Depth)

160 (Height) mm

•

Measuring Jig

590 (Width)

220 (Depth)

543.5 (Height) mm

(Incl. the micrometer unit (the measured data transfer unit))

•

Pickup Position Camera Control Unit (Power Supply for LED Illumination)

76 (Width)

154.5 (Depth)

55 (Height) mm

•

Liquid Crystal Display (DELL E Series)

378.5 (Width)

141 (Depth)

403 (Height) mm

•

Keyboard

442 (Width)

149 (Depth)

24.5 (Height) mm