Operating Manual.pdf - 第36页

4022 591 960 62 Operating Manual 02.0 2 FCM Mu ltif lex 34 Off Line Pr eparation CHAPTER 7 Off Line Preparation In case of an error , call for assistance 1. Prin t th e set-up list of the n ew pr oduct (out o f the PPS s…

100%1 / 80
4022 591 96062 Operating Manual
02.02 FCM Multiflex 33
Current Program Selection
Check nozzle type on each placement module by set-up list.
FIGURE 53
FIGURE 54
PA 2747/00 PA 2747/20 PA 2747/30
PA 2747/40 PA 2747/50 PA 2747/60
PA 2748/10 PA 2748/20
PA 2748/30
FIGURE 55
4022 591 96062 Operating Manual
02.02 FCM Multiflex 34
Off Line Preparation
CHAPTER 7 Off Line Preparation
In case of an error, call for assistance
1. Print the set-up list of the new product (out of the PPS system) and
according to the set-up list:
2. Prepare the nozzle set.
FIGURE 56
3. Prepare the Multiflex board support.
FIGURE 57
PA 2747/00 PA 2747/20 PA 2747/30
PA 2747/40 PA 2747/50 PA 2747/60
PA 2748/10 PA 2748/20
PA 2748/30
4. Take a production board (next product) for width adjustment &
calibration purposes.
FIGURE 58
5. Load the feeders. (See Chapter 2.7.3: Feeder Handling).
FIGURE 59
6. Place the feeders in the feeder trolley (see Chapter 2.7.3.1: Feeder
Exchange).
FIGURE 60
4022 591 96062 Operating Manual
02.02 FCM Multiflex 35
7. Prepare calibration boards.
FIGURE 61 Off-line calibration preparation