Operating Manual.pdf - 第40页
4022 591 960 62 Operating Manual 02.0 2 FCM Mu ltif lex 38 New Progr am Selection 8.1.1 Or der Entry & Scheduling 1. Sel ect “ Or der ” - “ Entry ” SCREEN 20 2. T ype “ Order ID ” , select “ Actio n sp ec ” and sel e…
4022 591 96062 Operating Manual
02.02 FCM Multiflex 37
CHAPTER 8 New Program Selection
8.1 Production-Flow for “On Line” Activities
FIGURE 62
Order Entry
Order Scheduling
Calibration
required ?
Ye s
Calibrate
product ?
Ye s
Exchange carrier
Adjust Width &
Height
No
Link new product
action spec with
exsisting calibrion
file
Exchange carrier
Adjust Width &
Height
On line activities
No
Use default
Strip & Ref
positions
Ye s
Set correct
strip&referencepin
positions.
No
Described in User Reference Manual
Optional action
Advanced Order
Scheduling
Optional action & described in User
Reference Manual
Adjust Stoppers
Runin & Runout
Exchange
calibration nozzles
Start Calibration
Adjust Stoppers
Runin & Runout
Exchange Nozzles
Start-up
Production
Exchange feeders
& Trolleys
Exchange feeders
& Trolleys
Exchange Nozzles
Te ac h
Fiducials
Badmarks
4022 591 96062 Operating Manual
02.02 FCM Multiflex 38
New Program Selection
8.1.1 Order Entry & Scheduling
1. Select “Order” - “Entry”
SCREEN 20
2. Type “Order ID”, select “Action spec” and select “OK”.
SCREEN 21
3. Select “Order” - “Schedule”
SCREEN 22
4022 591 96062 Operating Manual
02.02 FCM Multiflex 39
New Program Selection
4. If “calibration required = Yes” than press “Quit” and continue with step 8
else continue with paragraph 8.2
SCREEN 23
5. Select “Calibration” from menubar.
6. Select Order ID at “Calibrate machine for order”
7. Type “Calibration set name “
8. Select “Start Calibration”
SCREEN 24
NOTE
The following menu items are described in the User Reference Manual:
1. Strip positions:
- Use fixed alternatives
- Enter non-default values
2. Reference pin position:
- Use default
- Enter non-default values