Operating Manual.pdf - 第71页
4022 591 960 62 Operating Manual 02.0 2 FCM Mu ltif lex 69 Err or Handling CHAPTER 11 Err or Handling 11.1 Erro r Handling In case of an error , this can be noticed. ■ The machine will stop. ■ The blu e warning lig ht. ■…
4022 591 96062 Operating Manual
02.02 FCM Multiflex 68
Running Production
10.3 Tape cutting
1. Cut and remove tape and top foil regularly.
FIGURE 113
4022 591 96062 Operating Manual
02.02 FCM Multiflex 69
Error Handling
CHAPTER 11 Error Handling
11.1 Error Handling
In case of an error, this can be noticed.
■ The machine will stop.
■ The blue warning light.
■ Warning beeps.
■ The status display will change to Error.
■ The module with an error will turn red in the status window
FIGURE 114
1.
SCREEN 51
2. The dialogue shows all process errors.
3. If an error message is not clear, select the message and press ‘F1’
(activates the Help Screen).
In case of an SVS Pro error: select the error on the scanner.
When a position indicator is scanned the first error or warning on the
concerning feeder trolley is selected.
4. Solve the problem.
5. After the problem is solved:
■ Select ‘Retry all [F3]’ to retry all displayed errors.
■ Select ‘Retry [F7]’ to retry only the selected error(s).
4022 591 96062 Operating Manual
02.02 FCM Multiflex 70
Error Handling
6. If the problem can not be solved:
• Select ‘Skip action [F11]’ to skip the selected action. The FCM stops
this component placement on the board.
SCREEN 52
• Select ‘Skip board [F12]’ to stop further production of this board.
SCREEN 53
CAUTION
SELECTING ‘SKIP ACTION’ OR ’SKIP BOARD’ LEADS TO INCOMPLETE
BOARDS AT THE FCM RUN-OUT. THE MESSAGE ‘SUSPECTED BOARD IN
RUN-OUT SECTION’ APPEARS. REMOVE OR MARK THE BOARD.
7. The Error Cause Dialogue appears if this function has been enabled in the
’MIS-Parameters’. Select an error cause. After selection the error recovery
action will be performed.
SCREEN 54