00198268-02_GS_SIPLACE-Pro-14.1-R17-1_EN.pdf - 第31页
Getting S tarted SIPLACE Pro 14.1 (R17-1) 3 T utorial 05/2017 Edition 3.3 Exercise 2: Creating a Component Sha pe 31 3.3 Exercise 2: Creating a Component Shape Aim of exercise 3 A component shape will be cr eated for the…
3 Tutorial Getting Started SIPLACE Pro 14.1 (R17-1)
3.2 Exercise 1: Importing ASCII Centroid Data 05/2017 Edition
30
Result 3
The component shapes have been assigned. There is no component shape available for the com-
ponent SO20L. This will need to be created in Exercise 2: Creating a Component Shape. 3
3
Fig. 3 - 3 Result: "Placement List created and Component Shapes assigned" screen
Close the placement list.
Create the directory My Placement Lists\Getting Started in the Saves As dialog box.
Save this placement list as Single_Cluster.
3
PLCC 68 704
SO20L You will create this in exercise 2.
Component Component shape
Getting Started SIPLACE Pro 14.1 (R17-1) 3 Tutorial
05/2017 Edition 3.3 Exercise 2: Creating a Component Shape
31
3.3 Exercise 2: Creating a Component Shape
Aim of exercise 3
A component shape will be created for the component SO20L and then assigned to this compo-
nent. 3
How to create a component shape 3
Open the Wizard with Tools => Component Shape Wizard... or by clicking on the icon.
In the Configure Component Shape - Step 1 of 4 dialog box, select the Integrated Circuits
tab.
Then select 2-Row Component Shape from the Select a Component Shape Type - Step 1 of
4 dialog box.
Click on Next.
In the Configure Component Shape – Step 2 von 4 dialog box, choose the lead type Gull
Wing.
Click on Next.
Select the option Overall width from the Configure Component Shape – Step 3 of 4 dialog box.
– Enter the following data for your component shape:
Click on Next.
Units mm
Body width 7.400
Length (X) 12.800
Pitch 1.270
Lead width 0.430
Lead length 1.400
Contact length 0.400
Height (Z) 2.500
Width (Y) 10.200 (will be preset)
3 Tutorial Getting Started SIPLACE Pro 14.1 (R17-1)
3.3 Exercise 2: Creating a Component Shape 05/2017 Edition
32
Enter the following data in the Configure Component Shape - Step 4 of 4 dialog box:
Click on Finish.
Result 3
The component shape will be shown in the Component Shape Editor and can be edited there. 3
3
Fig. 3 - 4 Result: "Component Shape created" screen
3
Switch to the Nozzles tab (see Pos.1).
Assign nozzle 817, 917 and 920 with the Add button.
Switch to the Cameras tab (see Pos. 2).
Assign camera RV Camera X (28) 24.2x24.2 and RV Camera X (29) 32x32 with the Add
button.
Total number of leads 20
Top: 10
Bottom: 10
Note
These examples have been kept relatively simple to help new users familiarize them-
selves with the SIPLACE Pro user interface and functions.