00198268-02_GS_SIPLACE-Pro-14.1-R17-1_EN.pdf - 第42页
3 T utorial Getting S tarted SIPLACE Pro 14.1 (R17-1) 3.6 Exercise 5: Creating a Job with Initial Setup 05/2017 Edition 42 Result 3 The setup will be shown in the Setup Editor . 3 3 Fig. 3 - 9 Result: "Setup" s…
Getting Started SIPLACE Pro 14.1 (R17-1) 3 Tutorial
05/2017 Edition 3.6 Exercise 5: Creating a Job with Initial Setup
41
3.6 Exercise 5: Creating a Job with Initial Setup
3.6.1 Creating an Initial Setup
Aim of exercise 3
To create an initial setup for a job. An initial setup must be available in order for a job to be opti-
mized. The initial setup is set as the starting point for the optimization process. 3
How to create an initial setup 3
Open the Setup Editor with the menu Item => New => Setup.
Select the line Line1_Lesson4. at My Lines\Getting Started .
Open Station1_D4 or Station2_D3 in the tab tree view and select the appropriate location
(see also Fig. 3 - 9 on page 42)
Enter the head types and component cameras for both stations in the Head tab.
Station1_X4:
Location 1
RV 12 9xx
RV Camera X (28) 24.2x24.2
Location 2
RV 12 9xx
RV Camera X (28) 24.2x24.2
Location 3
RV 12 9xx
RV Camera X (28) 24.2x24.2
Location 4
RV 12 9xx
RV Camera X (28) 24.2x24.2
Station2_X3
Location 1
RV 12 9xx
RV Camera X (28) 24.2x24.2
Location 2 --
Location 3
Twin Head 5xx
IC Camera X (33) 66x50
Location 4
RV 6 8xx 9xx
RV Cam X (29) 32x32
3 Tutorial Getting Started SIPLACE Pro 14.1 (R17-1)
3.6 Exercise 5: Creating a Job with Initial Setup 05/2017 Edition
42
Result 3
The setup will be shown in the Setup Editor. 3
3
Fig. 3 - 9 Result: "Setup" screen
Close the setup and create the directory My Setups\Getting Started for this setup, in the
Save As dialog box.
Give the name Initial_Setup.
This setup can now be assigned to a job and then optimized. Continue with
section 3.6.2 on page 43.
Getting Started SIPLACE Pro 14.1 (R17-1) 3 Tutorial
05/2017 Edition 3.6 Exercise 5: Creating a Job with Initial Setup
43
3.6.2 Preparing the Job for Optimization
Aim of exercise 3
To create a job and use this to generate an optimized setup during the next exercise. An initial
setup must be assigned in the Job Editor and at least one board or recipe must be available. 3
How to create a job 3
Open the Job Editor with the menu Item => New => Job.
In the Job tab, at Initial Setup select the icon.
Select the Initial_Setup setup at My Setups\Getting Started .
Switch to the Recipe List tab.
Move the cursor to this tab and do a right-click on the mouse.
Select the Insert Boards function from the context menu and then choose the Single_PCB
board from My Boards\Getting Started .
Create the directory My Recipes\Getting Started for this recipe, in the Save As dialog box.
Assign the name Recipe1_Lesson5.
Close this job and create the directory My Jobs\Getting Started for this job, in the Save As
dialog box.
Assign the name Job1_Lesson5.