00196351-06_UM_ACT_DE_EN.pdf - 第140页
ACT - Accurac y Check Tool / User Manual 09/2015 Edition 50 If this is not the pla cement station on whi ch the ACT is to be perfo rmed, the plat e is automatically passed through the m achine, since ther e is no specifi…
ACT - Accuracy Check Tool / User Manual 09/2015 Edition
49
4.2.4.2 SX-Series and DX-Series
On the SIPLACE SX- and DX-series machines the reachability to insert the plate in the input
section is limited, particularly on machines that are placed in the middle or at the end of a line.
Therefore, the plate has to be inserted at the first machine of the line.
► Press Start.
► Insert the plate up to 50%+x into the input section of the first machine.
► Click on the Conveyor interface button directly under the conveyor in the station software
(see Figure 4-25).
Figure 4-25: Conveyor interface button
Figure 4-26: Conveyor interface window
► Select LP einfahren (Loading PCB).
► Click OK.
ACT - Accuracy Check Tool / User Manual 09/2015 Edition
50
If this is not the placement station on which the ACT is to be performed, the plate is automatically
passed through the machine, since there is no specification by SIPLACE Pro for components to be
placed.
If no components are to be placed on the next machine either, the plate is automatically passed
through this machine, too.
On the station being in ACT mode and for which a corresponding specification for components to
be placed is available, the plate is stopped and gets placed automatically in the placement area,
see section 4.2.6.
Then the measurement is started automatically.
ACT - Accuracy Check Tool / User Manual 09/2015 Edition
51
4.2.5 Working with the ACT Function under Station Software 605.xx
NOTICE
On SIPLACE X and D machines running station software 605.xx (platform 2+), it is
necessary to install additional software on the station computer to be able to use the
ACT.
The installation is described in chapter 6.
► Switch on the machine.
The station computer will boot. The user interface basic view for the SC program will soon appear.
Figure 4-27: Basic view of user interface GUI at the station
► From the Optionen (Options) menu, select Bedienebene… (Access level...) (Figure 4-25).
The Bedienebene (Access level) dialog box opens.