00193802-01.pdf - 第115页
User Manual SIPLAC E CF 4 Setting up the placement system Software version SR.101.xx 06/2003 US Edition 4.3 Adapting the component t rolley to another PCB transport height 115 (1) Clam ping s crews , 4 per side (2) Holes…
4 Setting up the placement system User Manual SIPLACE CF
4.3 Adapting the component trolley to another PCB transport height Software version SR.101.xx 06/2003 US Edition
114
4.3 Adapting the component trolley to another PCB
transport height
4.3.1 Tools
Allen keys, set up to 8 mm
4.3.2 Safety instructions
WARNING DANGER OF CRUSHING
Remove all the feeders from the component table bed before you adjust the table height of the
component trolley. Act with considerable care during the conversion process because the table
bed is very heavy. 4
4
Fig. 4.3 - 1 Adapting the component trolley to another PCB transport height
4
User Manual SIPLACE CF 4 Setting up the placement system
Software version SR.101.xx 06/2003 US Edition 4.3 Adapting the component trolley to another PCB transport height
115
(1) Clamping screws, 4 per side
(2) Holes in the cross-beam for adjusting the table height to 830, 900, 930 and 950 mm
Æ Insert the two Allen keys (8 mm) into the correct holes for the current PCB transport height (see
Fig. 4.3 - 1
).
Æ Loosen the four clamping screws on both sides of the component trolley (see point 1 in Fig.
4.3 - 1
).
Æ Ask two people to help you raise and lower the table bed: they should hold the table bed while
you remove the two Allen keys.
Æ Raise or lower the table bed to the desired PCB transport height.
Æ Push the two Allen keys (8 mm) into the hole for the new transport height.
Æ Turn the Allen keys so that the cross-beam (item 2 in Fig. 4.3 - 1) is seated on the edge of the
keys. You can then fix the cross-beam in place and easily pull out the Allen keys.
Æ Fix the cross-beam on both sides with the four clamping screws (item 1 in Fig. 4.3 - 1).
Æ Now turn the Allen keys slightly and remove.
4 Setting up the placement system User Manual SIPLACE CF
4.3 Adapting the component trolley to another PCB transport height Software version SR.101.xx 06/2003 US Edition
116