3OM-1208-011_w.pdf - 第161页

3-74 AIVEDT -ID 3.3 Multi-Model Repetitive Patterns (1) Information on Pattern Program Creation • Example of Patterns Placement Coordinate Reference Pattern C Pattern A Pattern B Pattern Origin (OX 3, OY 3 ) ( signs are …

100%1 / 345
3-73
AIVEDT-ID
0606-009
(5) P-data (U01)
•
Unit Control
Create the data in the same way as described in "3.1 Single Pattern (Global
Recognition Enabled)".
•
Unit PCB Fiducial
Table 3C15
Unit PCB
Fiducial
Recog Coord
X1 [mm]
Recog Coord
Y1 [mm]
Recog Coord
X2 [mm]
Recog Coord
Y2 [mm]
Fiducial Mark
FM1
Fiducial Mark
FM2
Enable FX
1
FY
1
FX
2
FY
2
1 1
•
P-data
Table 3C16
P-No. X [mm] Y [mm] Z = theta [deg] H [mm] Fdr No. C Comment
1 X
1
Y
1
+000.00 +0.000 101 -
2 X
2
Y
2
+090.00 +0.000 103 -
3 X
3
Y
3
+180.00 +0.000 105 -
4 +000.000 +000.000 +000.00 +0.000 000 P
Note
Set "P" or "Q" in the "C" text box of the last step. "C" represents "Control
Command".
(6) O-data (U01)
Table 3C17
O-No. X [mm] Y [mm] Z = theta [deg] H C Comment
1 0X
1
0Y
1
+000.00 +0.000 -
2 0X
2
0Y
2
+000.00 +0.000 -
3 0X
3
0Y
3
+000.00 +0.000 -
4 +000.000 +000.000 +000.00 +0.000 P
3.2 Repetitive Patterns (Image Recognition Enabled)
3-74
AIVEDT-ID
3.3 Multi-Model Repetitive Patterns
(1) Information on Pattern Program Creation
•
Example of Patterns
Placement
Coordinate
Reference
Pattern C
Pattern A
Pattern B
Pattern Origin (OX
3, OY3)
( signs are pattern origins.)
Fig. 3C56
The figure above shows that the mother board has eight unit PCBs (7 unit
PCBs for Patterns A and B and 1 unit PCB for Pattern C). Components are
placed repeatedly in regular order on each unit PCB for Patterns A and B,
forming repetitive patterns. In the case of Pattern C, components are placed
without forming any repetitive pattern.
0606-009
3.3 Multi-Model Repetitive Patterns
3-75
AIVEDT-ID
•
List of Required Data
Table 3C18
Pattern Program Required Data
Operation Data PCB Data
PEC Recognition Data
PEC Recognition Mark Data
Setup Data Note (a)
Placement
Head/Nozzle Data
Heads 1 through 4
Placement Feeder
Location Data
Feeder Bases #1 through #4
Placement Data U01 P-data P-data
Unit Control Note (b)
Unit PCB Fiducial
O-data
Placement Data Un P-data P-data
Unit Control Note (b)
Unit PCB Fiducial
O-data
Note
(a) Create this data for automatic conveyor width adjustment.
(b) Specify these parameters (data) according to the situational changes.
(2) Creation of Operation Data
Create the data in the same way as described in "3.2 Repetitive Patterns (Image
Recognition Enabled)".
Note:
The created data is commonly used for Models A, B, and C.
(3) Placement Head/Nozzle Data
Create the data in the same way as described in "3.1 Single Pattern (Global
Recognition Enabled)".
(4)
Creation of Placement Feeder Location Data
Create the data in the same way as described in "3.1 Single Pattern (Global
Recognition Enabled)".
Note:
The created data is commonly used for Models
A, B, and C.
0606-009
3.3 Multi-Model Repetitive Patterns