3OM-1208-011_w.pdf - 第323页
6-90 AIVEDT -ID 5.2 Setting of Available Range for Passwords This window can be used to specify the scope (available area) of user ’ s authority . When the [A vlbl Area Set] button is pressed, the "A vlbl Area Set&q…
6-89
AIVEDT-ID
•
How to set or change a password
Procedure
(1) When the button corresponding to the user’s authority is pressed, the
"Password Entry" window opens.
Fig. 3F81 "Password Entry" Window
(2) Enter the desired password.
The entered string of characters are expressed using "*" in the "Password"
entry box.
(3) When the [Set] button is pressed, the "Password Reentry" window opens.
Enter the same password again and press the [Set] button.
The password is set or changed and "Set" appears in red on the right side of
the selected password entry button.
•
How to cancel the set password
Procedure
(1) To cancel the set password, press the password entry according to the user’s
authority. The "Password Entry" window opens.
(2) Press the [Set] button without entering any characters in the entry box. The
"Password Reentry" window opens. Press the [Set] button again without
entering any characters.
The preset password is canceled and "Not Set" appears in blue on the right
side of the selected password entry button.
0606-009
5.1 Password Setting
6-90
AIVEDT-ID
5.2 Setting of Available Range for Passwords
This window can be used to specify the scope (available area) of user’s
authority.
When the [Avlbl Area Set] button is pressed, the "Avlbl Area Set" window
opens.
[2]
[1]
Fig. 3F82 "Avlbl Area Set" Window
0606-009
5.2 Setting of Available Range for Passwords
6-91
AIVEDT-ID
0606-009
[1] [Password Set] Button
When this button is pressed, the "Password Set" window opens.
[2]
"Avlbl Area Set" Buttons
Set the scope of authority (available range) to use the described
functions.
Ev
ery
time the button (corresponding to the desired function) is pressed,
the label changes in scrolling such as "OP2"
→
"OP1"
→
"SUP"
→
"OP2".
The labels on the buttons indicate that the functions described on the
left side of the buttons are available for the following operators.
SUP :
This indicates that only the supervisor is given the authority to
use the function.
A red bar appears on the right side of the function name.
OP1 :
This indicates that the supervisor and the operator #1 are given
the authority to use the function.
Red and green bars appear on the right side of the function
name.
OP2 :
This indicates that the supervisor
, the operator #1, and the
operator #2 are given the authority to use the function.
That is, the selection means that all operators can use the
function.
Red, green, and yellow bars appear on the right side of the
function name.
5.2 Setting of Available Range for Passwords