3OM-1208-011_w.pdf - 第68页
1-9 AIVEDT -ID 2.5 Composition of Placement Data The set parameters are used to place the components (IDs in the placement feeder location data) on the points with the specified coordinates in the designated direction. On…
1-8
AIVEDT-ID
2.4 Composition of Placement Feeder Location Data
The set parameters are used to determine which feeder slot Nos. (Fdr No.)
various types of components should be allocated to.
Component IDs (types of components to be allocated) must be specified for
each individual feeder bases.
Reference
Refer to "1.4 Placement Feeder Location Data" in "Chapter 3" for the
details of each item according to the reference Nos. (Ref. Nos.).
C01 Feeder Bases #1, #2, #3, #4, and Work Area Table 3A6
Ref. No. Data Name
C01_01 Fdr No.
C01_02 Component ID
C01_03 C (Control Command)
C01_04 Comment
C01_05 Feeder Fixed
C01_06 Feeder
Alternate
C01_07 Fdr No.
C01_08 Component Library Comment
C01_09 Dir [deg], Carrier Data
T
ype, Width [mm]
C01_10 Fd. Pitch [mm]
C01_11
Used Parts
2.4 Composition of Placement Feeder Location Data
0606-009
1-9
AIVEDT-ID
2.5 Composition of Placement Data
The set parameters are used to place the components (IDs in the placement
feeder location data) on the points with the specified coordinates in the
designated direction.
One step is allocated for each component to be placed.
Reference
Refer to "1.5 Placement Data" in "Chapter 3" for the details of each item.
D01 Placement Data Un Table 3A7
Ref. No. Data Name
D01_01 Selection of Placement Data Unit
D02 Placement Data (P-data) Table 3A8
Ref. No. Data Name
D02_01 Unit Control
D02_02 Placement Offset
Offsets X [mm] and Y [mm]
Of
fset Z [deg]
Offset H [mm]
D02_03 Unit PCB Fiducial
Recog Coord X1 [mm] and Y1 [mm]
Recog Coord X2 [mm] and Y2 [mm]
Fiducial Marks FM1 and FM2
D02_04 P-No.
D02_05 X [mm],
Y [mm]
D02_06 Z=theta [deg]
D02_07 H [mm]
D02_08
Fdr No.
D02_09 V
D02_10 C (Control Command)
D02_1
1 Comment
D02_12 Recog Coord X1 [mm] and Y1 [mm]
D02_13
Recog Coord X2 [mm] and Y2 [mm]
D02_14 Fiducial Marks FM1 and FM2
D03 Placement Data (O-data) Table 3A9
Ref. No. Data Name
D03_01 O-No.
D03_02 X [mm], Y [mm]
D03_03 Z=theta [deg]
D03_04 H
D03_05
C (Control Command)
D03_06 Comment
2.5 Composition of Placement Data
0606-009
1-10
AIVEDT-ID
3. Outline of Component Library
3.1 Purpose
•
The component library is a database used to manage
"
specific information
(data) on components
"
required for operation of the component placement
machine.
•
By making use of the component library data, time for pattern program
data creation and editing can be shortened greatly.
3.2 Component IDs and Component Library Data
•
The component library is composed of
"
Component IDs (data names)
"
and
"
Component Library Data (Specific Data on Components)”.
Component Library
Component ID
Identification Data
Common Component
Data
Control Data
Placeable Data
Component Library
Data
Shape Data
Individual Component
Data
Recognition Data
Fig. 3A3 Composition of Component Library
3. Outline of Component Library
0606-009