141-400-57-probestationaccessoriescatalog.pdf_-_141-400-probestationaccessoriescatalog_1.pdf.pdf - 第109页

PN 141-400 www.formfactor.com Probe Card Holders • 93 Revision 57, February, 2023 Probe Station A ccessories Pr o be C ard Holders Pr o be Ca r d Ho l de r s and A cce s so rie s P A, PM , D SP 100 52 9 — P r ob e Car d …

100%1 / 169
PN 141-400 www.formfactor.com Positioners and Positioner Accessories • 92
Revision 57, February, 2023 Probe Station Accessories
148722 — VCP110, DC Triax, Cryo, PMC200/PAC200
Features
• Use d for IV/CV/RF probing
and failure analysis in
vacuum/cryogenic
environments
• Use d with high performance
DC or RF p robes
• VCP110 high vacuum probe
positioner
• Stainless steel main body
• Magnetic foot adapter
• Probe arm DC triax with vacuum proof triax cable with connector to
electrical feedthrough flange
• Thermal contacts for probe co oling
Specifications
• Feature resolution: 3 μm ( 0.12 mils)
• Travel range: 12 mm (0.5 in) in X, Y, and Z
• Mount: magnetic
• Footprint (WxD): 65 x 65 mm (0.24 x 0.24 in)
Compatibility
• PAC200, PMC200
PN 141-400 www.formfactor.com Probe Card Holders • 93
Revision 57, February, 2023 Probe Station Accessories
Probe Card Holders
Probe Card Holders and Accessories
PA, PM, DSP
100529 — Probe Card Holder, 6x7 in
Features
• Accepts 15 0 mm (6 in) wide
probe card
• Probe card located below platen
• Flexible probe arms
recommended if DPP3xx is u sed
• Low profile probe card holder with
bridge mounted 5° Theta and planarity adjustment
Compatibility
• PA300, PM300, PA200, PM8, PM5, all DSP stations
129912 — Probe Card Holder, 4.5 x 7 in to 4.5 x 11 in
Features
• Top loader/front loader
functionality
• Maximum probe card
thickness: 23 mm (0.9 in),
front loading
• Very stiff design
• Requires Platen Insert Ring
PH/PC for use in PM300BEP (132521)
Specifications
• For standard formats:
– Width: 114 mm (4.5 in)
– Length: 178- 279 mm (7-11 in)
• Theta adjustment range: 5°
• Minimum tip drop: 2 mm (0 .08 in)
Compatibility
• PA300, PM300, PA200 and PA200 BlueRay, PM8, PM5, al l DSP
stations
PROBE CARD HOLDER ACCESSORIES
51127 — Celadon Cable Harness
Features
• 25 triaxial cable harness for Celadon probe cards (single site, multi
site), MiniTiles or VersaTiles, leng th 2 meter (6.6 ft)
Note: The double number o f cables in the harness or even several
harnesses are required for Kelvin Connections (two cables to each
probe)
• Cable end to the prober: 26 pole microcoax connector AMP (1
Ground)
• Cable end to test meter: 25 3-lug triax p lugs
100651 — Insert for Probe Card Holder
Features
• Used with probe cards
with probe card holder
and HF platen
• When DPP positioners
are used, RPP305-B
must be removed
Compatibility
• MPS150, EPS150, PM8, PM300, PA200, PA300 with RF platen,
PN 141-400 www.formfactor.com Probe Card Holders • 94
Revision 57, February, 2023 Probe Station Accessories
Probe Card Holders and Accessories
CM300XI
171-226 — Probe Card Holder 4.5 in for shielded
CM300xi with Top Chambers
Features
• Use d with 114 mm (4.5 in)
width probe cards with the
CM300xi Advanced and
probe card
• Integrated ProtecPlate for
optimal low-level accuracy
• Frost-free probing
• Simultaneous usage with positioners
• Simple and fast installation
• Easy compensation for different tip drop
• Check probe card for mechanical compatibility (electric
connectors, tip drop, wire harness, etc.)
Specifications
• Probe card support:
– Max. probe card length = 284 mm (11.2 in) (max. 142 mm [5.6
in] from probe center to front/rear)
– Tip drop adjustable for 3.0 to 5.0 mm (in 0.5 mm steps)
Compatibility
• CM300xi
171-976 — Probe Card Holder 4.5 in for shielded
CM300xi with Cover
Features
• Use d with114 mm
(4.5 in) width
probe cards
inside the EMI/
RFI shielded and
light-tight CM300xi environment
• Integrated AttoGuard for optimal low-level accuracy
• Frost-free probing
• Use positioners in conjunction with the probe ca rd by removing the
PCH cover (open environment)
• Simple and fast installation
• Easy compensation for different t ip drop
• Check probe card for mechanical compatibility ( electric
connectors, tip drop, wire harness, etc.)
Specifications
• Probe card su pport:
– Max. probe card length = 284 mm (11.2 in) (max. 1 42 mm [5.6
in] from probe center to front/rear)
– Tip drop adjus table for 3.0 to 5.0 mm (in 0.5 mm steps)
Compatibility
• CM300xi
171-977 — Probe Card Holder 4.5 in for shielded
CM300xi with Cover and Celadon Probe Cards
Features
• Used with 114 mm
(4.5 in) width probe
cards inside the
EMI/RFI shielded
and light-tight
CM300xi
environment
• Integrated
AttoGuard for
optimal low-level
accuracy
• Frost-free probing
• Use positioners in conjunction with the probe ca rd by removing the
PCH cover (open environment)
• Simple and fast installation
• Easy compensation of different tip drop
• Check probe card for mechanical compatibility ( electric
connectors, tip drop, wire harness, etc.)
Specifications
• Probe card su pport:
– Max. probe card length = 284 mm (11.2 in) (max. 1 42 mm
[5.6 in] from probe ce nter to front/rear)
– Tip drop adjus table for 3.0 to 5.0 mm (in 0.5 mm steps)
Compatibility
• CM300xi