141-400-57-probestationaccessoriescatalog.pdf_-_141-400-probestationaccessoriescatalog_1.pdf.pdf - 第140页
PN 141-400 www.formfactor.com Probe Mounts/Holders and Pro bes • 1 24 Revision 57, February, 2023 Probe Station A ccessories S um m it DC Pr obe Arm s and Mo un ts 104 -0 30K — DCP Pro be Mo unt, Dua l T ria x Ada pt er …
PN 141-400 www.formfactor.com Probe Mounts/Holders and Probes • 123
Revision 57, February, 2023 Probe Station Accessories
144-391 — Triaxial Probe (Bent)
Features
• Guarded DC mea sure ments with
triaxial probe
• Integrated triaxial cable for low-noise measurements
• Easy connection to Elite 300 triaxial connection panel on p laten
• Ben t configuration for increased microscope objective clearance
with high magnification/low working distance objective lenses
• Easy probe needle replacement without tools
• Compatible with all 45° PTT serie s probe needles
• The temperature of the cable containing arm must not exceed
200°C. Usually this is suitable for 300°C wafer temperature in an
open setup with an arm at least 10mm above the wafer.
Kit Contents
• Ben t 35 ° triax probe
• Integrated triaxial low-noise cable, 76 cm (30 in) with triax (m)
connector
Compatibility
• Elite 300, Summit, SUMMIT200
144-392 — Unshielded Probe Kit
Features
• Interchangeable probe arms
(unshielded)
• Easy probe needle
replacement without tools
• Pin jack for DC electrical connection
• Compatible with all PTT series probe needles
Kit Contents
• Collet adapter with pin lock
connector (f)
• Straight u nshielded probe arm
with jack lock
• 35° bent unshielded probe arm
with jack lock
• 46 cm (18 in) cable with pin jack
(m) to (m)
Compatibility
• Elite 300, Summit, SUMMIT200
PHQ — Quick Lock Probe Holder
Features
• Replacement probe ti p
holder for MMP probes
• Quick lock needle holding
mechanism (spring-loaded
Collette style)
• Constructed of nickel plated brass that can be user-formed as
needed
Specifications
• 114 mm (4.5 in) in length
• Nickel plated brass
• Quick lock mechanism
Kit Contents
• Probe tip holder
• MAE-44/18 cable 46 cm (18 in)
Compatibility
• Summit
PHW — Wrench Lock Probe Holder
Features
• Replacement probe ti p
holder for MMP probes
• Wrench lock needle holding
mechanism (set screw hold)
• Constructed of nickel plated
brass that can be user-formed as needed
Specifications
• 114 mm (4.5 in) in length
• Nickel plated brass
• Wrench lock mechanism
Kit Contents
• Probe tip holder
• MAE-44/18 cable 46 cm (18 in)
• Allen wrench
Compatibility
• Summit
Unshielded probe (straight)
and collet shown attached to
universal probe holder and
DPP2xx positioner
PN 141-400 www.formfactor.com Probe Mounts/Holders and Probes • 124
Revision 57, February, 2023 Probe Station Accessories
Summit DC Probe Arms and Mounts
104-030K — DCP Probe Mount, Dual Triax Adapter
(Kelvin) for RPP305-EW-SU positioner
Features
• Ena bles Kelvin connection to DCP style
probes on East/West RPP305
positioners
• Sup ports Summit 11/12K and S300
systems
Specifications
• Instrument connections are female mini-
triax connectors
• Probe connections are ca bles with
SSMC male fo r use with DCP style probes
• Usa ble from -60°C to +300°C (-140° to +572°F, above +250°C
[+482°F]: 8 hours max. operation)
• 50 Ohm characteristic impedance
• Breakdown voltage: >500Vo lts
• Max curren t = 1Amp
Kit Contents
• Mounting hardware
Compatibility
• Summit, S300, Alessi
104-856K — DCP Probe Mount, Dual Triax Adapter
(Kelvin) for RPP305-NS-SU Positioner
Features
• Ena bles Kelvin connection to DCP style pr obes on North/South RF
positioners
• Sup ports Summit 11/12K and S300 systems
Specifications
• Instrument connections are female mini-triax c onnectors
• Probe connections are ca bles with SSMC male for use with DCP
style probes
• Usa ble from -60°C to +300°C (-140° to +572°F, above +250°C
[+482°F]: 8 hours max. operation)
• 50 Ohm characteristic impedance
• Breakdown voltage: >500Vo lts
• Max curren t = 1Amp
Kit Contents
• Mounting hardware
Compatibility
• Summit, S300, Alessi
114-818 — DCP Probe Mount, Dual Triax Adapter
(Kelvin) for DPP2xx
Features
• Enables Kelvin connection to DCP style
probes on DPP2xx positioners
• Supports Summit 11/12K and S300
systems
Specifications
• Instrument connections ar e female mini-
triax connectors
• Probe connections are cables with SSMC
male for use with DCP style probes
• Usable from -60°C to +300°C (-140° to +572°F, above +250°C
[+482°F]: 8 hours max. operation)
• 50 Ohm characteristic impedance
• Breakdown voltage: >500Volts
• Max current = 1Amp
Kit Contents
• Mounting hardware
Compatibility
• Summit, S300, Alessi
114-842 — Needle Probe Mount and Jack Lock Holder
for DPP2xx
Product Features
• Enhanced probe mount for PTT
needle probes (45°)
• Easy p robe needle replacement
without any tools
• Top hat compatible
• Will work on positioners
equipped for DCP probes
• Uses mini p in jack style or SSMC
cable connection
Kit Contents
• Includes arm and mounting hardware
• Recommended for use with PTT-XX/4-25 (45°) style needles (not
included)
Stat ion Compatibility
• Summit, S300, Alessi
PN 141-400 www.formfactor.com Probe Mounts/Holders and Probes • 125
Revision 57, February, 2023 Probe Station Accessories
114-843 — Needle Probe Mount and Jack Lock Holder
for MS1 Series Positioners
Features
• Needle probe h older (PTT style
needles) for MS1 series
programmable positioners
• Jack lock style holding mechanism
• Top hat compatible
• Will work on positioners equipped for
DCP probes
• Use s mini pin jack style cable
connection
Kit Contents
• Includes arm and mounting hardware
• Rec ommended for use with PTT-XX/4-25 (45degree) style needles
(not included)
Compatibility
• Summit, S300, Alessi
114-847 — Needle Probe Mount and Jack Lock Holder
for MH2 Positioners
Features
• Needle probe h older (PTT style
needles) for MH2 series positioners
• Jack lock style holding mechanism
• Top hat compatible
• Will work on positioners equipped for
DCP probes
• Use s mini pin jack style cable
connection
Kit Contents
• Includes arm and mounting hardware
• Rec ommended for use with PTT-XX/4-25 (45degree) style needles
(not included)
Compatibility
• Summit, S300, Alessi
115-596 — DCP Probe Mount, Dual Triax Adapter
(Kelvin) for MS1 Series Positioners
Features
• Enables Kelvin connection to DCP style
probes on MS1 series programmable
positioners
Specifications
• Instrument connection are female mini-triax
connectors
• Probe connections are cables with SSMC
male for use with DCP style probes
• Usable from -60°C to +300°C (-140° to +572°F, above +250°C
[+482°F]: 8 hours max. operation)
• 50 Ohm characteristic impedance
• Breakdown voltage: >500Volts
• Max current = 1Amp
Kit Contents
• Mounting hardware
Compatibility
• Summit, S300, Alessi
116-031 — DCP Probe Mount for DPP2xx, Direct Probe/
Cable Conn (SSMC)
Features
• Mounting bracket for DCP probes, for
use on DPP2xx positioners
• To be used wi th direct cable from
instrument to DCP probe (e.g., 105-540
or 124-562 BNC to SSMC cables
• Top Hat compatible
Kit Contents
• Mounting hardware
Compatibility
• Summit, S300, Alessi