141-400-57-probestationaccessoriescatalog.pdf_-_141-400-probestationaccessoriescatalog_1.pdf.pdf - 第114页

PN 141-400 www.formfactor.com Probe Card Holders • 98 Revision 57, February, 2023 Probe Station A ccessories • The ta rotation: ± 7.5° • Max planarization height r ange: up t o 40 mils compression at each planarization p…

100%1 / 169
PN 141-400 www.formfactor.com Probe Card Holders • 97
Revision 57, February, 2023 Probe Station Accessories
177-610/X2-PIPCHM — MicroChamber Probe Card
Holder
Features
• Universal p robe card holder
for 114 mm (4.5 in)
rectangular probe cards
• Maintains dark, dry, EMI-RFI
shielded en vironment
(Elite 300 with
MicroChamber)
• PCH can be oriented E/W/S/
N for short cables run to test equ ipment
• Low pr ofile design allows simultaneous probe card and internal
node needle p robes
• Quick changeover from positioners to probe card
• Sup ports multiple probing configurations with removable access
covers
• Sup ports multiple probe c ard needle drafts with height adjustment
• Easy 3-point probe card planari zation
Specifications
• Temperature range supported: -6 0°C to 300°C (-76°F to 572°F)
• Probe card support:
– 114 mm (4.5 in) wide rectangular cards
– Max. probe card length with edge connector: 11.375
– Needles for 216 mm (8.5 in) long cards can be up to 64 mm (2.5
in) off center
• Probe card draft (distance between bottom of probe card and
probe tip):
– Standard PCH rail (PN 162-000)
– Optional deep PCH rail (PN 162-001)
• Front view of this
section is shown in
Standard PCH rail
assembly (PN 162-
000) and Optional
deep PCH rail
assembly (PN 162-
001) images below
• All units are in mm
Overall probe card draft = 4.55 mm – 11.07 mm
Overall probe card draft = 2.65 mm – 8.79 mm
PN 141-400 www.formfactor.com Probe Card Holders • 98
Revision 57, February, 2023 Probe Station Accessories
• Theta rotation: ± 7.5°
• Max planarization height range: up to 40 mils compression at each
planarization point (3)
• Max probe card force: 20 kg (44 lb)
Kit Contents
• Probe card holder
• MicroChamber cover (supports TopHat microscope objective seal)
• Edg e connector kit with 48 and 70 pin connectors (f)
• Rear cable heat shield/support
• Probe card height adjustment kit (4 height settings)
• Cable access/exit kit (2)
• Quick access covers (4)
• Standard PCH rail assembly (PN 162-000)
Compatibility
• Elite 300/AP, Elite 300/M, SUMMIT200-AP, SUMMIT200-M,
TESLA200-AP, TESLA200-M (<= 3kV)
Ordering Information
• For HTS compatible probe card holder, order 177-620
177-620/X2-PIPCHMH — MicroChamber Probe Card
Holder, HTS, 40 mm, Universal
Features
• Universal probe card holder
for 114 mm (4.5 in)
rectangular probe cards
• Maintains da rk, dry, EMI-
RFI shielded e nvironment
(Elite with MicroChamber)
• PCH can be oriented E/W/
S/N for short cables run to
test equipment
• Low profile de sign allows simultaneous probe card and internal
node needle probes
• Quick changeover from positioners to probe card
• Supports multiple probing configurations with removable access
covers
• Supports multiple probe card needle drafts with height adjustment
• Easy 3 -point probe card planarization
• Constructed with high-stability thermal materials
Specifications
• Temperature range supported: -60°C to 300°C (-76°F to 572°F)
• Probe card su pport:
– 114 mm (4.5 in) wide rectangular cards
– Max. probe card length with edge co nnector: 11.375
– Nee dles for 216 mm (8.5 in) long cards can be up to 64 mm (2.5
in) off center
• Probe card draft (distance between bottom of probe card and
probe tip):
Shown with all quick
access covers, exit
panels and TopHat cover
removed
Shown with all quick access
covers in place
Shown with TopHat cover
removed
• Front view of this
section is shown in
Standard HTS PCH rail
assembly (PN 162-002)
and Optional HTS PCH
deep rail assembly (PN
162-003) images below
• All units are in mm
PN 141-400 www.formfactor.com Probe Card Holders • 99
Revision 57, February, 2023 Probe Station Accessories
– Standard HTS PCH rail assembly (PN 162-002)
– Optional HTS PCH de ep rail assembly (PN 162-003)
• Theta rotation: ± 7.5°
• Max planarization height range: up to 40 mils compression at each
planarization point (3)
• Max probe card force: 20 kg (44 lb)
Kit Contents
• Probe card holder
• MicroChamber cover (supports TopHat microscope objective seal)
• Edge connector kit with 48 a nd 70 pin connectors (f)
• Rear cable heat shield/support
• Probe card height adjustment kit (4 h eight settings)
• Cable access/exit kit (2)
• Quick access covers (4)
• Standard HTS PCH rai l assembly (PN 162-002)
Compatibility
• Elite 300/AP, Elite 300/M, Summit with HTS platen, SUMMIT200-
AP, SUMMIT200-M, TESLA200-AP, TESLA200-M (<= 3kV)
Overall probe card draft = 4.55 mm – 11.07 mm
Overall probe card draft = 2.65 mm – 8.79 mm
Shown with all quick
access covers, exit
panels and TopHat cover
removed
Shown with all quick access
covers in place
Shown with TopHat cover
removed