KD-2077_SPE_EN.pdf

High - Speed Dispenser KD - 2077 PRODUCT S PECIFICATIONS

100%1 / 26
High-Speed Dispenser
KD-2077
PRODUCT SPECIFICATIONS
Important
(1) No part of this document may be copied or reproduced without the prior
permission of JUKI Corporation. (Including software and program)
(2) The contents of this document are subject to change without notice.
(3) This manual is prepared with extreme care. However, if you have any question
or find any error or omission in writing, contact our dealer or JUKI Corporation.
(4) JUKI Corporation shall disclaim all the responsibility for any trouble resulting
from the user's abnormal operation regardless of Item (3).
(5) Microsoft, Windows are registered trademarks or trademarks of Microsoft
Corporation in the United States and /or other countries.
The company names and product names mentioned in this document are
generally registered trademarks or trademarks of the respective companies.
Table of contents
1 Overview ........................................................................................................................... 1
2 Features............................................................................................................................ 2
3 System Configuration ....................................................................................................... 3
4 Specifications .................................................................................................................... 4
4.1 Equipment Specifications ............................................................................................ 4
4.1.1 Power supply specifications .................................................................................. 4
4.1.2 Rated apparent power .......................................................................................... 4
4.1.3 Air pressure .......................................................................................................... 4
4.1.4 Maximum air consumption .................................................................................... 4
4.1.5 Operating environmental conditions ..................................................................... 4
4.1.6 Transport and storage environmental conditions .................................................. 4
4.1.7 External Dimensions ............................................................................................. 5
4.1.8 Mass of the main body.......................................................................................... 5
4.1.9 Noise .................................................................................................................... 5
4.2 Dispensing Head Unit ................................................................................................. 6
4.2.1 Dispensing time .................................................................................................... 6
4.2.2 Dispensing accuracy (X,Y or θ) ............................................................................ 6
4.2.3 Resolution ............................................................................................................. 7
4.2.4 Dispensing angle setting ....................................................................................... 7
4.2.5 Applicable syringe ................................................................................................. 7
4.2.6 Applicable needles ................................................................................................ 7
4.2.7 Discharge needles ................................................................................................ 7
4.2.8 Residual amount detecting function ...................................................................... 7
4.2.9 Air volume correcting function ............................................................................... 7
4.2.10 Temperature regulating function ......................................................................... 7
4.3 Recommended Glues ................................................................................................. 8
4.4 Target PWB ................................................................................................................. 8
4.4.1 PWB transporting direction ................................................................................... 8
4.4.2 PWB dimensions .................................................................................................. 8
4.4.3 PWB mass ............................................................................................................ 8
4.4.4 PWB parameter limits ........................................................................................... 9
4.4.5 PWB transport reference .................................................................................... 10
4.4.6 Allowable value of PWB warp ............................................................................. 10
4.4.7 PWB clamping method ....................................................................................... 10
4.4.8 Background transporting function ....................................................................... 10
4.4.9 PWB width alignment method ............................................................................. 10
4.4.10 PWB buffer ....................................................................................................... 10
4.5 PWB Positioning ....................................................................................................... 11
4.5.1 PWB positioning reference ................................................................................. 11
4.5.2 PWB recognition visual field ............................................................................... 11
4.5.3 Window size ....................................................................................................... 11
4.5.4 Recognition mark correction method .................................................................. 11
4.5.5 Recognition mark shapes ................................................................................... 12
5 Standard functions and Options ...................................................................................... 14
5.1 Standard functions .................................................................................................... 14