KD-2077_SPE_EN.pdf - 第7页

3 3 System Configur ation KD - 2077 Sy stem Configurat ion z KE - 2077 Signal light with buzzer The device or function enc losed with dotted line i s an option. *1 T o be delivered from the factor y *2 The extended lengt…

2 Features

(1) Dispensing performance

• With the standard 3-head dispense head unit, the machine permits high-speed dispensing at the

optimum rate of 0.1 sec/shot (36,000 SPH: except the PWB transport time and BOS mark

recognition time).

(2) Improved effective tact

• Independent speed control using the stepping motor of the IN/OUT buffer can be exerted.

(3) Low fraction defective

• The PWB support section (PWB backup) is driven by motor, thereby shortening the

clamp/unclamp time.

• A high-resolution AC servo motor of 260,000 pulses per rotation is mounted on the θ axis to

improve the operation performance.

• An air volume correcting function provided as standard has implemented stable glue dispensing

without relying on the residual glue amount in the syringe.

• A glue temperature control function has implemented stable dispensing without being affected by

ambient temperature.

• A blank run unit and a dispensing diameter check function permit stable dispensing.

• A residual glue amount detecting function permits stable glue dispensing even if the residual glue

amount in the syringe changes.

(4) Space saving

• Highest space saving in the series which is equivalent to the KE-2070/2080

• The line visibility is improved by low profile.

(5) Improved versatility

• A 30 cc syringe is available.

• Applicable up to the L-board (410 mm x 360 mm).

• A bad mark detecting function by OCC is provided as standard.

(6) Improved operability

• Windows XP is adopted as OS, thereby implementing high operability.

• Use of the language switching capability (between Japanese and English or between Chinese and

English)

(7) High flexibility

• Mixed line of the CX/FX/KE series can be organized.

• PWBs can transport without head and X-Y home-return.

• Two USB ports are provided as standard.

(8) High maintainability

• In addition to an hour meter, the XY travel distance is notified, thereby improving the maintainability.

• With password protection, the maintenance levels are hierarchically classified to improve the

degree of freedom for machine settings.

• A troubleshooting function is improved.

3 System Configuration

KD-2077 System Configuration

KE-2077

Signal light with buzzer

The device or function enclosed with

dotted line is an option.

*1 To be delivered from the factory

*2 The extended length is 150 mm or 250 mm.

*3 The height is 950 mm.

Power supply unit

CPU board

I/O control

Cabinet

Liquid crystal display

HOD

Keyboard

Mouse

100 Base/10 Base T

Ethernet board

USB port

Touch panel (*1

)

SSD (solid state drive)

Caster (*1)

Emergency stop button

Leakage breaker (*1)

FDD (USB connection)

CD-ROM drive (USB connection)

Safety control unit

Motor control unit

Head

PWB conveyor unit

EPU (external programming unit)

Outline reference

Temperature regulator

Air pressure device piping

system

Dispensing diameter check unit

(Blank run unit)

Production support system

UPS (

*1)

Pin reference (*1)

Auto PWB width alignment (*1)

Conveyor extension (*1 and *2)

Conveyor height (

*1 and *3

)

Dispensing head L

Dispensing head C

Dispensing head R

Temperature regulating function

OCC camera (offset collection camera)

Air volume correcting function

Residual amount detecting function

BMR (bad mark reader)

External air vent unit

FDD (incorporated)

4 Specifications

4.1 Equipment Specifications

4.1.1 Power supply specifications

Voltage: Three-phase 200 /220 /240 /380 /400/415 [V] AC specifications.

The voltage is selected depending on the destination at delivery from the factory.

Frequency: 50/60 Hz

Peak current (200 V AC): 22 A

* The primary side power cable is not attached.

** An appropriate cross-sectional area of the primary power cable may vary depending on the

cable routing conditions, length, and/or power voltage. Always use an appropriate cable

meeting the standards for the installation place from those stated in the Table below.

Power supply

Primary power cable

Less than 20m Less than 30m 40Less than 40m

200V/220V/240V AC 5.5 mm

or more 8.0 mm

or more 10.0 mm

or more

380V/400V/415V AC 5.5 mm

or more 5.5 mm

or more 6.0 mm

or more

4.1.2 Rated apparent power

1.1 kVA

Average power consumption at installation of each option.

4.1.3 Air pressure

0.5 ± 0.05 MPa

Dry air (oil, dust and other foreign substances shall be removed in advance. Water shall be

10ºC or less at dew point at a high pressure.)

The source pressure sensor is provided with an air-down detecting function and displays an

air-down alarm when the pressure goes down below 0.4 MPa.

4.1.4 Maximum air consumption

100 L/min (ANR)

4.1.5 Operating environmental conditions

Dispensing accuracy assurance temperature: +20ºC to +25ºC

Temperature: Ambient temperature + 10ºC to +35ºC

Humidity: 30% to 80% RH (Without condensation）

Altitude: 1,000m or less

4.1.6 Transport and storage environmental conditions

Temperature: -15ºC to +70ºC

Humidity: 20% to 95% RH (Without condensation)