4M-1751-005w_G5S.pdf - 第111页
4OM-1751 1-61 (3) Move the pin gauge to the direction of the length hand of pick-up hole and remove the internal clog. Pin gauge High-speed nozzle F4A52 …
4OM-1751
1-60
•
Method of cleaning high-speed nozzle hole
Procedure
(1) Firmly have the high-speed nozzle as shown in the following photograph
and insert it while matching a pin gauge center axis to a center axis of
a high-speed nozzle.
Notice
When a center axis shifts, the head might be damaged.
Pin gauge
High-speed nozzle
F4A50
(2) Put out the pin gauge from the head of the high-speed nozzle.
High-speed nozzle
Pin gauge
F4A51
1304-001
5.5 Cleaning of high-speed nozzle hole part with pin gauge
4OM-1751
1-61
(3) Move the pin gauge to the direction of the length hand of pick-up hole and
remove the internal clog.
Pin gauge
High-speed nozzle
F4A52
high-speed nozzle head by the masking tape).
High-speed nozzle
Masking tape
F4A53
1304-001
5.5 Cleaning of high-speed nozzle hole part with pin gauge
4OM-1751
1-62
•
For using the nozzle tip cleaning jig
A jig for cleaning HG22C or HG33C from the tip with a pin gauge, is provided.
Pin Gauge
Nozzle
Nozzle Tip Cleaning Jig
F4A54
Insert the nozzle from the tip section into the jig and insert the pin gauge gently
into the nozzle tip hole with the nozzle pressed against the jig.
In the case that the pin gauge is not easily inserted, do not insert it forcibly, but
repeat the pin gauge moving up and down operations.
1304-001
5.5 Cleaning of high-speed nozzle hole part with pin gauge